The plan is for the door to have square edges. To stay around those guidelines for the mortise (if the groove is the same width) would mean planing down the panel a bit more or rabbeting the panel. I...
Type: Posts; User: Micah Puscheck; Keyword(s):
The plan is for the door to have square edges. To stay around those guidelines for the mortise (if the groove is the same width) would mean planing down the panel a bit more or rabbeting the panel. I...
Thank you Kevin, that's very helpful!
Hello all!
Building a (sliding) door for a family member that had a somewhat specific preference. Not 100% sure it is the most fundamental design, but I think it's close enough to work.
Would...
+1. I have the same blade and with a properly set up table saw and fence, will create glue ready cuts.
Don't have experience with anything else, but I have a 15" Grizzly with the stock helical head and it's pretty sweet. Picked it up this year used for just over $1,000. Great machine and could take...
Also curious on this. I have a G0453z and noticed the same issue and similar amount of play. Thought that some part was just worn out.
Good point. I get the feeling that if that IS the problem, we may never get the report back that it was the case :)
Either way, hope it's an easy fix.
Thank you.
It's even more hidden with the diaper changing supplies that went on it right away :D what can you do.
Thanks again to all those with input. Ended up skipping the veneer concept and make a panel instead, which I think was the right call. First time running a project through the new planer too, which...
I hadn't heard that either (though I don't use reels), but I could infer that if you had a long extension cord on a reel and were using a significant draw over a long period of time that the heat...
Good point. I had laminated some 4/4 stock for legs on another proejct, but those are way smaller than full boards. Wasn't thinking of clamping practicality. Thank you.
Good point. It's a...
Thanks for your input Jamie.
I did use Sagulator (love that thing), but I'm always over the top with my weight calculations. Kiddos crawl and jump on everything, so I assumed 100lbs in the middle...
Given the knowledge and ideas that I've received here before, I figured I would ask a couple questions *before* cutting wood this time. I've ran through several ways to approach this, and I'm in...
As much as I try to get away from FB, Marketplace really is better. The signal to noise ratio selling and buying is much better, and using Messenger to reach out makes contact very simple.
I have very limited to no experience with premium saw blades. However, I also have the Freud Glue line blade and it works great. Really does make a glue ready edge - very satisfying!
They had the 10% off coupons until around the end of 2020. Only 5% after that.
Beyond the 5% coupon that they always offer when you browse the site?
I ordered my Grizzly in late December and got it in early March. I felt pretty lucky considering some people that ordered soon after had estimates for the late summer.
Figured it made me...
That is gorgeous. I really like the asymmetric look.
I just bought a used 15" Grizzly with a spiral head for $1,100. Obviously availability is the issue, but I'd imagine a 600 lb machine should be a pretty long-term purchase.
My point being, you...
Thanks for the kind words. Glad to know it isn't an obvious movement risk.
Hooks are linked below. Wife had the final call on those :)
...
Fun project that felt really short relative to the dresser that took me like 3 months. Also the first project I've had on my new 1023, which made everything just so much more enjoyable. Making glue...
5 second google search: Contractor Saw PALS - In-Line Industries - Woodworking Products (in-lineindustries.com)
Edit: to be clear, I know nothing about the product or application, just did a quick...
I think there's likely a lot more hits than misses.
Just received my new table saw from them, and it's great. The splitter was a bit bent, and I just called them up and they mailed out a new one...
It took me several months of slowly upselling myself before I pulled the trigger on the cabinet. Probably helped that you can hardly find anything right now, so you have lots of time to think!
I...