Search:

The barbacoa is outstanding too

grew up in a 1200 Sf 3 BR/ 1.5 Bath home with my 4 other siblings and parents

ML

Wiha

http://www.wihatools.com/indexes/Indx_power_bits.htm

ML

change the socket head screw out for a button head

ML

my left index finger which is 3mm shorter than the right says the shaper can be the most dangerous. I don't recommend letting a raised panel get away from you and get your hand pulled into the...

i should tip myself by buying more tools...

ML

I have some scrap Corian I make inserts out of . seems to work well enough.

ML

Thanks Ed Much appreciated.

ML

Thanks Steve, was hoping for real world, seems grizzly changes their dimensions frequently. I have a a alcove for it and can't move the 1400 LB safe its it doesn't fit...

ML

anyone with the Grizzly willing to measure the width from outside the filter housing to the outside of the cyclone for me?


ML

what he said!

I'm looking at the same thing I can't get beyond the $395 shipping from that company in NY. any idea if the inlet on the Grizzly can be rotated so it exits out the front?

ML

Can also remove 4mm of bone from a left index finger when making doors if you are not careful too.
Even though my shaper takes up more room in my shop than a router table on my TS i can't imagine...

You can also have custom molded ear buds made that incorporate the head phones they will block out unwanted noise while allowing you to listen to your ipod. I have a similar set made for hunting...

or get some extruded aluminum and use that as a bar.

ML

I've been using a Grizzly 3 HP left tilt TS for years. I find with a cut off sled, that really all I need. Though I do use a track saw more and more, just easier to set up and it has nearly replaced...

Not to be teh new guy smart @$$ but am currently running a PC 690 on one side of my table saw. Just sold a PC 3.5 HP plunge boat anchor. Already have more routers than I know what to do with and...

I'm in need a of dedicated router table or shaper. After pricing a new router motor (PC7518) benchdog top and router lift. I'm at what a 2 HP shaper costs. Any reason not to go with a shaper?
...

Being that I live across the street from the fairgrounds. You will not find any old tools at the swap meet. It's all new stuff from local stores and hardly any tools mostly china crap if ant tools...

I did this exact thing to run a small TIG weldor when I was renting an apartment.

ML

Correct. I'm planning on making up a 20' cord using 10 ga. wire.

My electrician wired the shop using 10/3 and set the outlets, I just need to make up the longer cord since the outlets are on the...

Got the shop wiring underway. using 6-20 outlet.
I need to make up an extension cord for my 3 Hp 220v TS.
What color wire goes to what terminal on the plug and outlet?

...

Is infinity the old Jasada? While great bits their customer service leaves something to be desired.

The ply bits are excellent for routing dadoes, just be sure to use a good straightedge.

ML

I did the same thing on my last place. Basically just extended the dryer outlet into the garage and replaced the outlet with a twist lock. Put a blank cover plate on the existing dryer outlet and...

Cause my shop is inside of a garage.

ML