I purchased the 3HP PCS and had it loaded onto my trailer . While strapping it down I was talking to the person who had set it onto the trailer I asked him about the differences of the ICS to the PCS...
Type: Posts; User: ED Budzinski; Keyword(s):
I purchased the 3HP PCS and had it loaded onto my trailer . While strapping it down I was talking to the person who had set it onto the trailer I asked him about the differences of the ICS to the PCS...
Red Oak , because of open pores .
Sound to me like more of a sales problem than the saw itself . I bought a Saw Stop Industrial and very happy with the purchase .
After touching the side of the rotating blade twice a few years back I purchased a SawStop Industrial model . Even thou that has never happened again I am very happy with the SawSop for it's safety...
I built a Saw Stop Type Hydraulic Lift for my model 29 PowerMatic Shaper . Originally used the Saw Stop Hyd. base under this shaper , however the shaper was too heavy . The new lift has double wheel...
I installed a VFD for my 5.5 HP Powermatic model 29 shaper . The VFD is dust proof and actually made for the outdoors . The MFG. sales firm recommended going with a unit which was twice the amperage...
Look into "Soundproof Cow" . Maybe those people can help you .
Blade Brake is active until the blade "rotation" has stopped . Before turning the blade by hand I shut off the switch next to the "Start - Stop" paddle switch .
I have the Saw Stop ICS and had no issues assembling the unit . Instructions were very precise .The saw is a Joy to use . 230 Volt 3 H.P. 52" fence .
I purchased a PCS and the another sales guy different from the salesman I purchased it from loaded it onto my trailer . After a discussion about the quality of that saw I had it unloaded and...
I might add that the Saw Stop Hydraulic Mobile Bases are designed to lift a table saw with the 52" table so they lift at a slight angle . When I built the home made Heavy Duty Lift for the old but...
I have a Saw Stop Industrial Table Saw with the Hydraulic Mobile Lift base . I liked the design so well that I purchased one for my Model 29 Powermatic Shaper . After modifying the width and...
Working as a Machine Tool Repairman for 45 Plus years a Spider coupling is a Cushing to remove metal to metal contact , However the two coupling half's need to be aligned with precision. We always...
Packing a bearing 1/3 full of grease is the maximum recommended by most bearing MFG's . Contact a major bearing distributor and they can tell you the specific amount of grease to use or find out for...
I recently purchased a Freud Ogee Bit #99-006 . It was recommended by a professional woodworker who has used one for years making exterior doors . I will use this in my Powermatic Model 29 Shaper .