Search:

Curious, for those who have basement shops, what level humidity do you set your humidifier on for the summer? thanks Brian

Spider is designed to wear and fail and is replaceable. Brian

Traditionally, the color of spider designates it torque rating, so make sure to get the correct "color." Alignment of the coupling hubs is important. Can't remember the tolerance of misalignment...

They could, if they chose too. I believe it costs more not to. Brian

Working on rededicating myself to meditation and stretching exercises. Mind over matter for me, I resist stuff that makes me feel better, go figure! Arthritis in my C1 C2 I broke in a car accident...

OK. Reminder, the fence was moving off square when I tightened the tilt mechanism, it was also moving off square when I turned it on and off. I finally removed the fence and took it to a local shop...

Thanks. Brian

2nd vote for this. Bolt is bottom up so top but adjusts to increase or decrease downward pressure. Old design, but should work when adjusted. You may need to replace the bolt with a slightly...

How did you cut the tenon to the correct size?

Lee, I really appreciate your help and suggestions. Brian

Always a good idea, I was hoping I could make up my mind without doing this, but.... brian

Lee, I don't know the size of the bed in the photo, just something I grabbed off google. Where would you add the detail from the riser on the head board? I thought about all four corners where it...

In the pic there are 3 panels/2 dividers left to right. I am asking if 1 divider would look better on a queen.

I just posted a picture of the top of the dresser showing the cutouts the corners. ...

Planning on building something similar to this design in a platform bed. Two questions.


1. I see the three panels across the head/foot boards. On a queen size bed would two panels look...

Planning on building something similar to this design in a platform bed. Two questions.

1. I see the three panels across the head/foot boards. On a queen size bed would two panels look better...

I did look at these. thanks for the idea. thinking about using this on both ends, but think it might be to much. brian


...

thanks I will investigate. brian

Would anyone have 2 pair of this unit they would be willing to sell to me? Need them to finish up a project.

Dynapro 15" 3D under mount units. thanks brian
...

I plan to make the leg so I have quarter sawn on all four faces and bevel the vertical edges on the post. I don't have the skill to fit cove mounding around an eight sided post like this. Brian

Planning on a build using a 4 x 4 posts with the edges beveled. Quarter saw oak. Using a solid panel on the head board foot board, I hate slats, dusting nightmare. Trying to come up with an idea...

Curious what you do at the miter station that requires precision? I built Norms version and use it as a chop saw station to break down 8ft lumber into shorter pieces for milling. I always finish...

Now that's funny and would probably work. Brian

These folks do the sharpening for Woodcraft and I assume others. I have used them 2-3 times and now and they do a good good and are reasonable. Set of 4 8" blades was $24. I have no affiliation...

Wax free is fine, I used std shellac in error. Brian

Edwin, I used. Bullseye wax free sealer. Brian