John;
You are correct. I believe the picture you pointed out is of the models prior to 2008 (?). I purchased my GO634 in 2007 and it had 4 rows of 14 bits in each row for a total of 56 cutters. the...
Type: Posts; User: Chris Ricker; Keyword(s):
John;
You are correct. I believe the picture you pointed out is of the models prior to 2008 (?). I purchased my GO634 in 2007 and it had 4 rows of 14 bits in each row for a total of 56 cutters. the...
From my research, Azek is a superior product that should suit your needs very well. I'm building a deck this year using Azek and have used the product on several outdoor projects with great results....
I watched that 4 times and thought it was hilarious !!
Thanks for the laugh
WOW Richard, you do beautiful work, Thanks for the tutorial!
I was driving down 71 from Mansfield to Columbus this week and noticed the buckets were hung on the Sugar Maples!
That's a sure sign spring is near. :)
Maple syrup, anyone?
Matt;
Is it possible to use the band saw to separate the fronts from the drawers then joint the faces and reattach them square to the carcass?
Just a thought
CR
THE DOORS LIFT OFF???
Ugh, they do.
well, you could always spend the extra $70 on a mobile base like I did.
Ya learn something new every day.
Now where is that instruction manual I was gonna...
I have a 3/4 and 1/2" Dasco chisels that I use and abuse all of the time, I stole them off of my Dad (who stole them off of my Grandpa) and I have 2 wooden handled screwdrivers(philips and slotted) I...
Hey Brian;
Check out Hartville Tool, They have extended their Holiday Sale till February 28th and the Whiteside bits are on sale for 20% off regular price. I think you use the coupon code HSAVE20 at...
Randy;
I've made several MDF ZCI's for my GO651 and had no need for extra reinforcements. FWIW
CR
The HD Lithonia fixtures also have a pull chain so you can turn off the ones in the area you're not working in.
FWIW
CR
I don't have this saw Cathy but, did you check the belt tension between the motor pulley and the bottom wheel when you put the new belt on? also, there may be a shear pin on the motor pulley that...
Hey Brian, check out WOOD Magazine, Nov. 2010 issue for a similar cabinet that I was planning to build. The plans are available as well.
Best of luck.
CR
Hey Tim;
Although I cant speak for all J/P combos, when using my Griz. in Jointer mode the work passes over the blades from right to left and when in Planer mode the work passes under the blade from...
The protruding drawer supports and the handles remind me of Krenov but the open mechanics of the drawer slides are fantastic.
Well done.
CR
Nice score, Keith!!
you're going to love the spiral cutter head.
David,
Don't worry about it too much, do the best you can and it will be ok.
I used the tooth brush and mineral spirits method and then ran a few boards through my J/P and it was fine.
Jacques, I hear ya.
I have never been ashamed to admit my mistakes (because I believe that there is plenty to learn from other peoples mistakes) but, I usually wait until the physical pain goes...
Hey Charlton,
I believe you have found a typo in the manual, good catch, you really are studying!
If you go to page 19 of the manual and look at Figures 15 and 16 you will find the correct...
Hey Terry, welcome to the Creek.
There is a lot of good advice from some very knowledgeable people on this forum and on this thread. I was in the same boat several years ago and with the help of...
Welcome to the Creek, Ken
Shawn.....I mean Prashun (sorry!) has some great advice. I think the plan is most important, after that its a matter of execution. Seeing that we are neighbors, if you need...
Nice job, Gil
Man, I could use a set of those! They are on the To-Do-List
Hey Frank
Sorry about your problem, I had the same thing a few weeks ago.
If you check the roller chain on the feed rollers, it probably jumped off the sprockets. It is a easy fix to put it back on...
I'm in as well!!
Just wait till you give that spiral cutter head a work out, you'll be impressed.
congrats!!