I have to prepare a quote on this material. From what I read it laser cuts ok. Does anyone have a speed (mms) setting so I can estimate the time. Maybe with a 130 watt or 80 watt?
Thanks
Type: Posts; User: Fred Britt; Keyword(s):
I have to prepare a quote on this material. From what I read it laser cuts ok. Does anyone have a speed (mms) setting so I can estimate the time. Maybe with a 130 watt or 80 watt?
Thanks
We did not go with Camfive, got scared with the tech department. Went with Titan250. Thunderlaser crew is the best when you need questions answered or replacement parts. They are GREAT people to...
New update, Camfive stated that machine cannot be loaded with RDworks. This is different from what the manufacturer stated.
On the 4" nozzle, they stated the reason they use 3" is because the 4"...
The Camfive is 220V with the converter. Had to install a switch for the blowers and a separate plug for the laser. The external laser is a pain to keep it right at times.
The 2 Thunderlasers are...
Looking at 2 laser machine options.
The first one is a Titan250 Thunderlaser (DONGGUAN) with RD works. It runs on 110V, has wheels and good tech support. Comes with standard 130 Watt Tube. Comes...
Looking to purchase a new laser machine. 130W or 150W.
I'm down to 2 machines. One comes with a 220V regualtor and the other just plugs into the wall.
The software on the 220V comes with...
Thanks, did the software modifications and looks like it's solved. :)
Thanks, I will give it a try. Should I decrease the number?
I just cut a 40mm square from 1/8" acrylic. It measures 39.87 on one side and 39.64 on the other. The difference is .23mm or .009055". I am using RD works.
Is this normal or something needs to be...
Thanks :)
Will see how to remove the email address.
Anyone have laser ready US map and world map file that you could share. I have a few but has a lot of double lines. Like to find one with single lines.
Thanks
Called a company that sells the plates. She said: "All of our products are made in the US from acrylic with a Chroma overlay. The Chroma has been specially engineered to be scratch and fingerprint...
A customer wanted some chroma plates for a wedding. Did anyone hear of this material? I googled and all I can find is that chroma is an acrylic paint. So I am thinking it's acrylic painted with a...
Just wondering the 3rd floor is a long way to carry a laser?
Our Camfive Laser, the mfg states to use 50/50 antifreeze. I flush the system every six months as per the manual.
Anyone laser cut duct tape? Bad or good for laser machine?
https://www.amazon.com/Duck-282705-DUC281944-Tape-Sheets/dp/B00AVLW0Y2/ref=sr_1_11?ie=UTF8&qid=1539238349&sr=8-11&keywords=duct+tape+sheet
Thanks, will give it a try :)
I engraved 72 name tags. Each sheet had 7 columns and 2 rows. Typical engraving starts at the first column and goes all the way to the end of column 7.
Is there a way if I wanted to engrave one at a...
Well it turns out it was 1/8 black matt acrylic when she sent the samples in.
I will give them a call. Thanks
Looks like extruded acrylic
1/16" Matte acrylic is what they want to match the others they have.
I have a customer that wants 1/16" Matte acrylic name tags. I checked with some places that sell acrylic and no one had 1/16" Cast. I found some 1/16" black matte acrylic P95 on ebay. Everyone I...
Check Thunderlaser web site. They have one.
I searched on the net, this foam with the acrylic or ?? On the front and back is a lot more in cost. I did see cheaper stuff with a cardboard front and back a little bit cheaper. I would think being...