Search:

A bit hard to describe, but just roll around the main section in a CCW direction, then when you get back above the little round switch, go back toward the right after you have laid it down and rolled...

Nope. Absolutely no cheating. I wouldn't even have thought of Youtube actually. What fun would that be?

Mitchell,

Thanks for the additive game. 4.5 hours later and I finished all 33 levels. Good luck!

If you want another addictive gave that is more physics than just puzzle, try this one on for...

A good fence with sighting lens and a fixed measuring tape on the rail should get you really close. I can get within about .005"-008" every time by sight. Tighten the fence down, loosen slightly...

count me in.

Only destructive to the brake machanism and saw blade, not the saw itself. Takes about 5 minutes to change out the brake and put a new blade in.

Dave,

Get a multimeter and use Chip's diagrams in combination. You shouldn't (can't?) properly troubleshoot an electrical circuit without one. (A cheap voltage indicator lamp could be used...

I think it is a matter of personal preference, as both will work. They both work by coating the surface, but in slightly different ways. One is "old school and one high tech. They also have different...

I guess I am hangin' out in the right place. There ARE people as nuts as I am, perhaps more so! :eek:

I have often been curious why someone wants a solid 1 piece type of door? I like the sound of it on some level. I had this come up recently with a friend as a matter of fact. What about expansion?...

Peter,

You are correct. Blue-Ray, HD Satellite boxes, and other HD output devices do use HDMI.

HOWEVER, they also have RJ45 jacks on the back. My Dish Network recievers require that they be...

"Off-Air" refers to the broadcast signals for your local channels that you can pick up with an antenna that are sent through the air via air broadcast. So "off-air" refers to those signals. (Not...

I know. It does seem weird. Apparently the issue is twofold. The first is the sheild/seal. They oxidize. The second is the issue of the package "breathing", so the concern is pitting/rust due to...

Matt,

I am no expert on how this is best done. I know it depends quite heavily on what equipment you have, whether it be cable, satellite with "legacy" equipment or current standards. You'll ahve...

We could go on about ABEC ratings, precision, country of origin, etc., for a long time. Working in the industrial sales world for years, I'll just jump in with a few tips.

1 - Don't buy a bearing...

I don't agree with the wireless over CAT5e hard wire recommendations as a blanket statement. It depends on what kind of a user you are and how big your home is. If you do a lot of large file...

I noted in the photos that you are not rotating the blade when you check it in front and back. You need to do this to insure you are not getting error due to the blade having some warp. You have to...

I can't apss this one up. I'm in!

Have you been living clean or what? That's a deal! I didn't have that luck when I looked.

I'm in too!

I think Doug is sneaking up on the answer here. I looked at the manual too.

I believe what the 1791999 number refers to is the base 3 HP unit. (Note no "K" on the end of the part number, like you...

Hmm. There's a thought. I have a farm supply place pretty close to my house that should have all kinds of washtubs and the like. I'll have to have a look. Good idea Greg!

Ken,

Just rub it in why don't ya! I am so envious of you guys that live out in the mountains. I have to spend the big bucks and fly out there and then only for a week at a time. So the chances of...

Another one of the main reasons I started with the inverted 30 gallon can is it is already fabricated and made of fairly heavy galvanized steel. All I have to do is introduce the inlet and outlet...

Greg,

I've been watching your thread here as I considering trying one myself. This is a similar concept of what I had come up with in another thread, which I posted sketches of. The main...