Search:

I live in the Uk but this avenue may be worth exploring I went on the internet and identified a forum for my make of car

On the forum I found a thread which provided information on where to...

Please see link below

https://www.woodworkersemporium.com/mike-mahoney-signature-5-8-gouge-the-bottom-feeder/

What can be a problem with Cole jaws is if you run them at a very fast speed and then turn the speed off abruptly the momentum and weight of the Cole jaws plus bowl can cause the Cole jaws to...

United kingdom price today 17 3 2022

Diesel $9.28 petrol $8.25 per US gallon

In Stuart video I believe he speaks about up to a maximum of 40mph but this would be under ideal conditions and a very competent woodturner

It would seem wise to regard this a the very upper...

Can someone please advise if my logic of using the method below is correct to calculate rpm and appropriate to use for turning

I constructed as a guide a rpm rim speed chart using the website...

It is often difficult in life to make decisions and I would offer the following advise

Seek out some form of counselling with the aim of being mentally in the best possible health before making...

I cannot be 100% sure but from memory I believe there was an article that suggested the AA rechargeable batteries sold by Ikea (Ladda brand) may be Panasonic Eneloops

please copy and paste link...

I am a retired pharmacist The ideal material for a pestle and mortar is glass The rational is you are able to grind highly coloured substances and not stain the mortar. Stoneware mortars should...

Thank you for your posts Having had time to reflect I agree with the comments made in particular Goodwill is the only way a club works, and that is usually done by the 10% that really cares...
...

I am a member of the committee at our woodturning club

Currently the responsibility of completing all of the day to day tasks in running the club rely solely on the goodwill of the committee...

Thank you to everyone for your posts in particular John and David for detailed information provided All of the posts reinforced my understanding of the various parameters that need to be considered ...

I would be interested to know your thoughts on both scenarios

My understanding is the ideal number of teeth for cutting blanks for woodturning is 3 tpi

A friend who is a woodturner insists that if you predominantly cut dry wood you need 6 tpi

Thoughts...

Why not simply label then photograph or video the wood
You can then look at the video or the pictures on your phone whenever you want

A task I find my magnifier useful for is removing splinters

A possible approach for the future could be to use an older router bit for the initial milling cuts then place an identical new bit in the router and make a final light pass to reduce the appearance...

I would have bought it, too... and give some of it to turning friends

"I wax both the steel screw and the brass screw. Waxing the steel screw gets wax in the hole so that when you put the brass screw in (with wax on it) the hole is already lubricated."

I live in the...

I would be interested to know

(1) What is the ratio of green wood to purchased kiln dried wood members turn

(2) How often do members purchase Kiln dried wood

(3) Where do turners ...

I have found 2 references to Norton products with different cas numbers

https://msdsdigital.com/norton-sharpening-stone-oil-msds

Norton sharpening stone oil has the cas number 8042-47-5
...

A scam email I regularly receive in the United Kingdom has the sender

Order confirmation

In the Uk it is possible to purchase wasp spray cans with the trigger mechanism shown in the diagram

below

https://cdn.aws.toolstation.com/images/141020-UK/800/78816.jpgor it may be possible...

I live in the Uk .Every year I have to deal with wasp nests

At the first sign I spray the nest morning and evening with a foam wasp nest killer and this method has been successful every year
...

I thought members may find this video from YouTube of Stuart Batty demonstrating sharpening interesting

https://www.youtube.com/watch?v=fhlMQr7Hk0k&t=2s&ab_channel=DeniseSawyer