Search:

So in my hobby shop I have an older griz 1029 2hp dust collector. All 4” duct system. Only one machine at a time. Biggest is 20” planer and also longest draw (about 45 ft). Works good, no clogs no...

I have a griz 2 hp 1029 dust collector. It’s about 14 years old. Can I take the horizontal shaft motor and blower assembly and rotate the motor vertical to connect the blower inlet to the top of a...

Thanks for all the input. I am going to use 2x6x 12 fir studs. The current shop/garage has 10ft walls. We have decided to go 12ft on this new shop looks like code will allow 24” spacing so that’s the...

So I am ready to start framing my new shop this weekend. 20x40 stick frame on slab, Hardie siding shingle roof. Was going to do 10ft walls. Now thinking 12 ft tall. What’s the best way. Using 2 x 4...

Living with Texas coast humidity and temperature swings the magnetic material clings tight enough to the metal surfaces to eliminate the surface exposure to the air and also provides enough of an...

Hardin/Jefferson co to line. I cover all my machine surfaces with magnetic sign material from amazon. Stops all rust. Easy to do
gary

I live on the east Texas gulf coast. Very high humidity and condensation in a uncontrolled shop. After years of Johnson’s paste wax and total rust bloom about twice a year because I didn’t apply the...

In my current shop I have a griz 1029 dust collector connected to Table saw with a hose on the floor running to the wall then connected to A vertical pipe as part of the rest of the system. It works...

I used the incra t track plus with the ruler. 18” long, 2 pieces. I have each set to 0 at the blade. I really only use the one lead section ruler to set my first stop. Then I put the 2 jigs together...

I have a hammer k3 winner 48x79 slider. My son has the griz 0623 so I have used both. I bought mine first and it was a hard decision to make. I also considered the sc2. I don’t think it will take a...

As long all your pieces are in the same space while the build you will be fine. Just don’t do some parts and take them inside while you do work on other parts. Then you would have a problem unless...

I ordered one is sept. Maybe oct last year. So long ago I don’t exactly remember. Anyway it arrived last week. Perfect condition. Extremely well packed. Easy to assemble. Base is much thicker steel...

I went through this process about 18 months ago. I went with the k3 winner package. 80” slider with the outrigger. I love it When I considered the sc 2c the rep pointed out some limits and...

On the bear crawl you can cut down one pair of tubes so it will close up to the smaller dimension. There is sill enough space for the corner brackets with out them hitting. I think you can go down to...

When I first started this journey in the early 90’s I got a craftsman 4” belt and disc (6?) I thought to would be very useful hardly used it. Gave it away and went a long time before I got the...

One of the reasons i think it works better than some other covers like hardboard is the magnetic enables full tight contact with no place for air that would have moisture. My mechanic tools are...

Just want to pass along something that works for me to prevent rust on your cast iron. Also lowers need to wax so often. I live on the Texas coast between Houston and the la state line. The shop is...

Thanks for all the great feedback. Lots of very good comments and it really help to gain understanding. If I do add a shaper I want to skip the multi step process I have done on my other main...

Background. I have an older hitachi m12v router in my table. Speed control went out so I renpmoved it and added a hf speed control it works ok. Looses some speed once you engage the Wood. Wife...

I have bunch of the original Bessey k body clamps and have broke the sliding jaw on one. Had a bunch of roof trusses clamped together and standing on edge. When they fell over the bar hit first and...

Thanks for all the responses. I had an old reliant 12” open end belt sander (not drum). Got it free from the lab at a particle board mill when the co I work for bought the mill to brown field...

I have been trying to figure out which sander would be most useful. I do general case type furniture and some cabinets. Try to do more solid wood than plywood. Don’t do any veneers. A drum sander...

Each of the 4 wires should be marked with a number printed on them. You should find a 1, a4, a5, and an 8. Also per the drawing. Blue is 1 yellow is 4. Black is 5 and red is 8.
to rotate in the...