thanks everyone. I appreciate the advice.
Type: Posts; User: Tom Schulze; Keyword(s):
thanks everyone. I appreciate the advice.
I've been testing on alder. It's going to take a lot of time to get to the depth I need in alder. but you are right it does engrave nicely.
Hello everyone, I need some advice on wood. I have a customer who is looking to do deep engraving into wood. like 1/8" inch deep. there is going to be a fair amount of detail that will be...
Ok, 4" version done. here is a side by side picture.
254956
For the party, they will be given as is, no finish. We will be engraving each child's name on them and of course filled with pirate booty :) I've also had a request for a 4" version that I am...
Thanks for all the compliments.
Sure, it's 6.5" wide by 5.25" tall by 4.5" deep
I used the BoxIt and FlexIt macros. when you have both installed it allows you to create the box with...
So, I finally got around to creating a project for my daughters birthday party. We're making all the kids these treasure chests filled with goodies. I thought you'd all like to see the creation...
Thanks Steve, much appreciated.
This is great. for those of you that develop any designs for cutting these, I would greatly appreciate them being posted.
That's awesome, thanks Rodne!
Rodne, where does one find Laserworks 6? When did that get released? I'm still on a version of 5.
Thanks
I don't have any info for you, but I am very intrigued to here the results. keep us informed.
got it, been in there before, just didn't know that t was also called scan line offset! thanks again.
ok, great, where do I find the scan line offset values?
I agree with Rich, I did try the lead in/out settings, I forgot to post that as well. it did not help correct the issue as you could still see the offset, plus one of the project I'm currently...
To all Shenhui owners:
I have an issue when cutting circles or arcs in that the start and end points are slightly skewed leaving a line on the edge of the piece it cuts. The end of the cut seems...
John, would you mind sharing your settings for paper cutting? thanks
Has anyone successfully used the dot cutting feature in laserworks to perform cutting similar to the other machines that have PPI settings?
Please share results if you would.
Tom
Rodne or whoever, can you explain how to set the dot intervals? I know where to set it, I just can't seem to find any documentation on what the settings should be or what they mean.
Thanks
Tom
That's my initial thought. also, just took out the supplied hoses and there are only three and no Ys. so I assume that they designed it to hook up in series.
OK, so I'm hooking up the cooling system on the two laser tubes and nowhere does it say whether the tubes should be hooked in series or parallel for the water flow. I have two thoughts. In series...
Yeah, no software at all in the bag. No, not going down stairs, going down a hill then in a patio door, removing both door tomorrow morning before they come. Angular cabinet and yes it has an amp...
yeah, there is future plans to put in a beam expander, thats why I wanted the 20mm lens. Was there a post about wiring the chiller in sequence on here that I can reference? Thanks for the software...
After an extra inspection in LA and seemingly stuck in every warehouse from china to here for some holiday or long weekend, it's finally here. The truck arrived this morning and we unloaded the two...
I would think the original step size may be off, producing an increasing error as the head moves down the X axis.