Search:

If you're looking for some one closer to home, try these guys: https://www.snookssaw.com/ I have purchased blades from them, and have used their sharpening service. I recommend both without...

You can buy just the guard and other parts from Grizzly in the states or through Marson Equipment in Canada. Grizzly has a parts diagram that you can order parts from directly. King, which handles...

Chris,
The guard is 5/8" from the end of the crosscut fence. In this position the blade will tiltto 45 degrees without repositioning the guard. The guard is also long enough to cover the scoring...

Steve,
There are four bolts that hold the dust chute. Two on the left side require a 4mm hex wrench and have a nylon spacer behind the chute. The two on the right side of the chute require a 13mm...

When I got my slider I was underwhelmed with the Euroguard/dust collection on the saw. I made an overhead system using the Excelsior guard and attached it to the roof trusses with a telescoping steel...

I have a Hammer B3 Winner that had become very difficult to raise and lower the saw blade. I called Tim Derr at Felder and was referred to Ron Siebach in tech support who guided me through the steps...

This gives you lots of useful info for repairing exterior rot: ...

I encountered the same problem and eventually removed the part. The saw works fine without it both with the scoring blade or with the larger blade. I have no idea of the function of the piece.

I also recommend the Kreg long reach Automaxx clamp combined with this t-nut: https://www.mcmaster.com/#94750a602/=193peqz, which fits the track in my Hammer slider and matches the threads in the...

It is possible to make a set up for a PC 7518 that is similar to the Jessem speed control box by using a Super PID to control the router's speed. I have been doing that with a PC 7519 for several...