Search:

Nice looking bench,I have been giving some thought to building a portable bench myself and I might steal a few of your parts of the design if you don't mind.

Thanks for taking the time to draw up the wiring diagram. I bought a Clearvue after the dust warz I did overfill it about 5 years ago and have been keeping an eye on the 33 gallon metal can but have...

I also have the Clearvue 1800 max a few of the install pics are on the Clearvue site under my shed install. I picked it over the competition because for the money at the time it had a bigger fan and...

I have the Dayton 3ug73 in my shop also. My shop is 26' by 32' with 10' ceiling drywalled and fairly well insulated. I used two peices of 1/2" all thread to drop it down so the thermostat was within...

Yep I am in

In the Nashville area it is Middle Tennessee Lumber it is west of Nashville Just off of I40 in Dickson. I havn't found a better supplier in the area for hardwood lumber.

Ps: no I don't work there...

I have a Bosch B1450 that I have had for years and is a great little plunge router but I just picked up a Triton MOOFOO1k3 2 1/4hp (AKA BAD MO FO). It comes in a kit with two collets,edge guide,guide...

While my floor is concrete I have seen painted wood floors that are any where from navy gray to trompe l'oeil 3 demensional looks. I guess it is up to you what you want. The paint I would go with...

I have the Incra 500 cut off sled and they addressed the support for the cut off with a section of the sled that was cut off the sled when it was first indexed with the blade or cut plumb with blade....

Yea what allen said. I need to type faster ..lol

What if you used maple plywood and cut kerf cuts in the back to get it to curve. Then cut culls out of plywood to get the desired shape. Attach maple plywood to culls with brads and glue. It should...

Middle Tennessee Lumber is in Dickson not far off of I 40 and is a great place to get solid wood most of it is s2s. Nashville plywood is the best place to buy plywood in the area that I have found. I...

When I built my shop in 2000 I moved my service from overhead to under ground,I set a 400 amp base. 100' to the meter base from the street and 125' from the base to the shop. The co op ran Al from...

I upgraded to a cabinet from a contractors saw about ten years ago and if I had to do it again now I would more than likely buy a ez power bench or a festool fmt. I know that the ss is a excellent...

I also have made that table and it has served well over the past few years. I would build it again if the smart table wasn't available. I have posted a pic of both and the old and busted legs I had...

I like mine outside in a 4' by 8' lean to shed that contains the upright IR 60 gallon compressor and the Clearvue 1800 max cyclone. I also plan on putting the ridgid mini cyclone vacuum lid converson...

I recieved my conversion lid from clearvue the other day it works great. I haven't used it for wood dust pick up yet but I did use it to pick up the dust from the one piece fiberglass tub and shower...

If you go to clearvue's web site and look at the gallieries you find mine there. I poured a slab and built a shed ontop of it for the cyclone and 5 hp compressor. You may have to dig a different...

I remember my first woodshop teacher Cowboy Roy Estes and the spice rack I built. He was quite a colorfull person to say the least and raced sulkies.

I have used Al wire for the feed it is what the power company uses for the feed to your house. In my area I need to pull a permit for a feed to out buildings and the inspectors have allways been glad...

Yes a 25 year old sony plus a dvd and vhs player. I also have a big sony boom box a frig and a lazy boy. It is my shop and I work when I want and relax when I want, I call woodworking a "HOBBY". It...

Jason
You can check the schools in you area. Mig welding is pretty easy. You can go to the Miller welding web site and find alot of good information.

Thanks Dave I have been looking for casters for my MM bandsaw the mobility kit they sell isn't the best. I am also going to put a set under my MM J/P.

Have Mig will travel.
Matt

I am also in the process of setting up my Clearvue Max here are a few pics of how I did mine. The 110v remote attaches to the coil on the relay to open and close the 220v contacts. 220v in from the...

They were on a shelf stashed away. I called ahead from another store and had them pull it down.

Good Luck