I don't know about fans..... I do know when my source died, the fans still worked..... But I think the issue is not usually that the pS totally fails, but doesn't supply enough power to fire the...
Type: Posts; User: John Lifer; Keyword(s):
I don't know about fans..... I do know when my source died, the fans still worked..... But I think the issue is not usually that the pS totally fails, but doesn't supply enough power to fire the...
I still think that it may be the base power supply, not the source. At least from my experience, when my source died, JPT 50w, it would NOT highlight and it would give me an overtemp error.
YMMV,...
Yes, ALL my versions have a agree/or disagree box pop up. English text unless I'm fooling with a different version.
Have been there on my Ray fine and on my SFX. But you haven't been seeing it. ...
The head may be getting hot from the copper mirror inside the head. It could be getting hot over time and if really copper, it could easily transfer heat to the head. Is it hotter near the mirror or...
My Rayfine 80 watt laser runs at 225mm/s and 65% power. I don't go over that on the power as it can streak the base metal. Be aware, some colors/lots of the JDS cups can have heavy PC and you might...
Saw an offering for a used Boss laser, and pulled up their website. The new models have Servo drive motors. Supposedly up to 1300mm/s speed. Which is three times what I drive my 1300x900 machine. ...
I would find someone local that has a fiber laser. While I wouldn't try cutting out shapes with it, Your numbers will come out WAY better. And a 175mm lens and a 50watt would be good fit.
Everything is 20 to 200% more than 3 years ago. I just had my roof and gutters replaced with insurance paying for it on my house and detached 20x24 shop. $38,000. I about fell out of my chair. I...
Yes, I've got a few, my wife has been getting 10 to 30 per day. You can easily detect these are fake by the font and grammar in the heading. Spam. mark spam
5k might be low..... just say'n, I'd bet on $20 a square foot. I've got to do my daughter's new garage. But it will be 2 part epoxy.... done myself
Ok, I just won't do fine leathers with my lasers. Nothing that is not veg tanned works well enough. Nice wallets, bibles are all off limits. So my question is what do you guys do to mark these...
The inline fan will most probably work. I've a 6 inch and it works pretty good over about 8 foot length. I'd not drop to a 4 inch for that type of fan unless you are getting a really high volume. ...
Not much to add to Kev's post, except I would never pay SAFe's outrageous Chinese laser cost. Figure you are buying a chinese laser from them for twice the delivered price, and you are paying $5K or...
It ALL depends upon whom you ask Bert. Slide AT LEAST TODAY is an unserialized part (even though Glock serializes the barrel, slide and frame at the least on their guns by German law).
I've heard...
Well, short answer is NO, but again it is convoluted. There are things such as 80% lowers for firearms. These require a 20% or so amount of work to turn into a receiver for a gun. Has historically...
That 3mm stuff is good, no bad spots with glue, I usually am cutting through, but have engraved some. Just have to watch for the warp.....
I happen to be on a Facebook laser for sale group. More than half of the adverts for used lasers are folk trying to sell GF laser in one form or another. Usually new or nearly new. There are...
Yep, nothing new, just keeps you a bit away from your template.....
Well, I'm glad you are having so much fun with them.. I do too. I had my second fiber on same network as my co2 and my first fiber, they both run off my main desktop. Added a laptop to run 2nd...
I think it was probably running G5 if that was installed. Programs will pick up text and ini files hidden that have internal text which might not really be related to version the program you are...
2 hp will be marginal in my opinion for 6 inch. I've used HF that is rated at that and while it had 2 four inch branches, it won't pull decent at that. I've got a 2 hp cyclone now and it does well...
Being in the garage, a potentially wet area as far as the electric code goes, doesn't this outlet need to be a GFCI? Just wondering.
There is a design on thingiverse that I modified almost 2 years ago and used rectangular magnets on both sides. It doesn't hold super tight, but all the connections are vertical and have the weight...
Outline for what? image, box, or text? Or everything. Later versions of Rdworks will not fill text (engrave) if it is filled in Coreldraw. I have to unfill and only make outline in corel to have...
Yes, I've got a Shapeoko 3xxl. The ONE thing that infuriates me with my decision is material size. I WANT to use it to cut out larger pieces and being limited to a 30x33 inch work area is really...