Search:

Thank you William and Luke. Really appreciate the help.

I just got this off Ebay. It’s really sharp, but has a slight U shaped cutting edge to it..maybe about 1/32”. I use Shapton Glass Stones from 500-16,000 grit. Should I use this as is (for bow ties...

Bastongne Walnut, I just put second coat on yesterday: 469252469253

I'll be applying Black Forest Ceramic coating lastly.

Blacktail studio who has used RM extensively sands to 180. Also, RM does not recommend Mineral Spirits, use Acetone instead.

Thank You Jim and Chris, very much appreciated!

What size dog hole do you all use? And what dog hole clamp/hold down do you all use? I'm glueing up a simple 2" hard maple top bench now and can't decide these two aspects of the bench design.

Really? That's very reassuring Frank, Thanks so much.

Marine grease is great except for the arbor. It makes threading the nut off/on quite hard relatively. I've been just keeping it clean with no grease. I'm not sure this is correct but much...

Very nice David! I'm finishing up my own audio rack of Sapele. I used mortise and tenon, a fun project. Good luck on finishing up your rack!

Thanks Eric. I really wanted to go with bearings after my experience w. ceramic blocks. Would've loved a new Harvey bs, I've seen some reviews comparing it to the mighty Laguna and they preferred...

Thanks to everyone, but I decided to upgrade to the Carter guides. And I splurged for a De tensioner as well lol. I would’ve loved to have bought a new Harvey bandsaw but $2700 is a fair amount to...

Thank so much guys, delayed response due to prob. with logging in. The size and capacity are good to me, I have the ext. riser. So I guess I'll go ahead and upgrade. Thanks again for the help!

I have prob. an 'original edition' ;) circa 1990's Jet JWBS-14 bandsaw. I need new bearings after loosing one of the ceramic blocks I'm presently using. I was thinking of upgrading to a Carter...

I just finished an audio rack made of 2" Sapelle for the tables...my TS75 w. stock blade cut thru like butter. 1 15/16"...so close!! ;))

Too hard guys, for $20: https://www.amazon.com/gp/product/B07D4D3BJ4/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

It took me over 45 mins to flatten a 1/4" Narex using 300 grit 3M sandpaper on glass. I dread doing my 1' LOL

I just used my Fuji Semi Pro2 for the very first time on my first shop project, a flip top for my planer and osc. sander. I used shellac that went on really nice and dried super fast. Just a...

NO worries David, and I really appreciate the advice! I had not realized how important it was to have something like this in addition to my dust collection.

Thanks guys, I just have a small, 11x15 shop. ANY kind of work fills the shop with crap so I need to build something to clean the air. I was just asking about what might be the best design. And...

So what's the best plans for a diy filter that can hang from rafters? Did you all pay the $10 for the ShopHacks or just copied the design by looks?

I just setup mine last week and had to call Incra as there was about 1/32" play after assembly. Turns out there's a 'tweak' to make it without play. When using the main miter, push the indicator...

I just setup a brand new INcra 5000. With the lg black lock handle and the end fence clamp not fastened, there's about 1/16" play in the actual miter gauge part...the gauge and the black plate...

I just set up my new SS fence yesterday. The face of the fence actually is undulating! What crap! Was thinking alum extrusion, but didn't think that it might not be stiff enough. Maybe I'll just...

I just built mine out with 2x4 walls using 2" foamboard. T1-11 over that. The only problem was having to use nail plates on every stud. I sealed the edges of the fb with spray foam, but I didn't...

I've been setting up my brand new PCS 3hsp SStop. I'm doing the fence adjustments today. I too was a bit disappointed in the SS fence. A cheap thin laminate instead of 1/2" HDPE I had on the first...