I have a nice Oneida high vac system running the shop, and like to keep it somewhat clean, so want a loose vacuum hose on each side, that can be used to reach most , if not all tools. But I hate...
Type: Posts; User: Dave Burson; Keyword(s):
I have a nice Oneida high vac system running the shop, and like to keep it somewhat clean, so want a loose vacuum hose on each side, that can be used to reach most , if not all tools. But I hate...
Thomas,
I have had the Oneida 5hp high vac unit for about 18 months. Love it!! I generally leave at least 3 gates open all the time, and whatever else I use is more than enough volume to handily...
Have a question on finishes- something I know very little about so far- building out my basement into a world class poker room. Will be putting a few wall shelves along the wall next to the pool...
Planning my miter station build, and the miter saw will be in a 30" wide cabinet, sitting between 2 - 2' wide base cabinets on each side, so total width of the station will be ~10 1/2'. On the left...
Thanks Jim. Wondering if by chance anyone is familiar with any of the large PVC (or similar) flex hose out there? I see this on amazon for a couple hundred, and hoping it'll last in attic over time....
OK Just got the new Oneida 5HP high pressure DC installed, and it's a beast! Love it already. Good news- it sucks 2150 cfm leaving ability to leave a few gates open if you choose to and still suck...
So glad to hear this, great!!!! Dave, can youi elaborate on how you have yours hooked up exactly? Will have tons of airflow, I think the 5hp oneida has 2100 cfm at 16" wc, but was planning to go off...
Have a Sawstop 5HP ICS, and am now upgrading the dust collector as well. Just ordered Oneida 5hp high pressure collector, so it should offer something my current 2 hp did not have- sufficient volume...
are you having any racking issues with that eclipse Jim?
Patrick
stepped thickness stops?? Picture?
Thanks Bob. On this assembly table I don't have room beneath to mount a patternmakers (plan that for the workbench which is next project) , so was focusing on a quick release ww vise that I can...
Building my assembly table now (aka James King type design) and wondering what the best source would be to find a high quality good sized quick release end/front vice? Looking for something better...
Who do y'all use to sharpen your router bits? If you've done it recently, any input on cost/turn around time?
TIA!! Dave
TY Jim! I agree about the 2hp. Just hoping for a little more boost out of it so as toy be able to suck both sides of the TS, and the router, and ... works ok but not enough juice to power anything...
Thanks John, those look great. I see you have the 3hp Oneida, did you notice any noticeable loss/efficiency in using this? I have the Oneida 2HP, and am considering upgradin to something bigger,...
Ok dust collection question- almost finishing up shop and my last station I am putting in is a large multiple table saw (3) and router table station. I planned for this when building shop so ran 6”...
Yessir there is. It is incredible!! I must say is is by far the smoothest and has least amount of vibration out of any of my machines- band saw, PM66, fdri;; press, sander...and for such a pwerful...
thanks so much a John. I saw the pictures and was also looking at the Zambus levelers. Great on both counts. But you’re right that would be a pain. Do you, or anyone, know of any heavy duty casters...
Having this beast delivered in 3 weeks-Model MJOIN12X86-5-1 Laguna - 12" Parallelogram Jointer with ShearTec II
and need to get a mobile base so when I pluck it off the crate with a cherry...
Yep, I tend to agree with that Robert! I know I could get things much cheaper if I take the time and look for one used. But I have been looking for over 8 months. Nothing but junk or way overpriced...
That helps a lot Robert. Gives me the confirmation I need. And I’m glad you said something about the fence. I see the laguna has a 60” x5 3/8” so that should be a lot better
hoping someone here...
Ty Matt. Appreciate the input but don’t think a used is a good choice me this time. I just went thru that with a old unisaw, which love having as my dedicated dado guy, but with the beefiness of the...
john
thanks do much! That helps a lot. I do like to weld a bit too so would love pictures of your base! And changes you’d make to it,and any notes you can think of - etc Ty!
I am finally going to add a jointer, since that big stack of lumber I cut last year is prime for being used finally. :)
Looking at a few, but strongly looking at the Grizzly G9860zx 12"...
I only have one. I can see that if making a number of one thing, two would be real nice! You find it helpful;?