Search:

Would you mind sending the scoring belt instructions to my email address? I can’t access the jpg for some reason and the site is not allowing me to make a donation.

Hi Michael. I bought a couple. Very well made. I had to file down both ends a bit to fit the saw, probably because he makes the inserts to fit his saw. For an outfeed table I use a 4x7’ MFT/router...

I’m planning on using Valchromat for walk-in closet built-ins. Really interesting material. I know that it’s stronger than MDF and more easily milled, but was wondering how well it takes screws? I...

Hi Michael. Yes I have seen those videos on YouTube. It seems that an FF jig can serve dual purposes (cross cut small pieces and rip boards). I’ll need do some more research to get a better sense...

All very helpful. Many thanks!

Many thanks Lisa. What did you use to make the parallel positioners?

Many thanks. This is helpful. I’m many months still from receiving the K3 79x48 I ordered the other day, so am taking the opportunity to do some research on what jigs to build. I see that some...

Have you experienced any issues with the wood moving around in the FF jig?

Many thanks to those who responded to my many queries regarding the Hammer K3 Winner. I went back and forth over the weekend on whether to purchase the 48x48 or the 79x48. Ultimately I chose the...

Thanks. Better safe than sorry. Texted the builder, who was able to switch out the wiring for the table saw to accommodate a 30 amp breaker.

Many thanks Derek. I really appreciate you (and others) taking the time to provide very useful information. I mainly work with thicker lumber and am looking forward to using the 12” blade. I’ve...

Thanks Derek. Since you also work mostly in hardwoods, I’d be interested to know which saw blades you purchased with the the saw, or after the saw from an after-market dealer. Also, I like the idea...

Many thanks Jim. This is certainly a learning process. The sales rep is putting together a couple of quotes for me — one for the 48x48 and one for the 79x48. As of today I’m leaning towards the...

Thank you Jim.

Many thanks Rod. Did you build your own F&F?

Hi Mike,

I'm curious as to what else you have learned since your purchase. I am in the market for a table saw and am considering a Hammer K3. One of my main concerns is repeatable, fast and...

An additional question before I forget. The sales rep recommends a 30 amp breaker for the saw, yet I see people using 20 amp breakers and even 15 amp. I would think that a dedicated 20 amp should...

Many thanks gentlemen. All very useful comments. Much appreciated. I stumbled upon the Hammer K3 in a post on this site, which has sucked me down another woodworking rabbit hole. I must say that in...

Hi Steve. What size shop do you have? I’m on the fence (no pun intended) between a 48x48 and a 79x48. My shop will be about 26x22. I currently do not have a shop (building a house that will have...

Thanks Rod. Did you lower the slider to be even with the table?

Many thanks for the input, Just got off the phone with the sales rep who was trying to convince me on the merits of choosing the 79x48. My shop will be about 26’ long and 22’ wide, which should...

I’m going through the same thought process. Currently live in a condo and use our roof deck as a work space. I have a portable MFT, a couple of track saws (Festool and Maffel), hand planes,...

IÂ’m vacillating between a regular table saw and a sliding table saw. IÂ’m considering a saw stop and a hammer k3,

I currently live in a condo in an urban area, but am building a house with a...