Search:

Personally I would replace a section of the exhaust ducting with non-metallic tubing, either flexible or rigid, then ground the first section connected to the fan. Electricity usually takes the path...

Jacob
Not sure if this is the right manual, but it has a version date of 2003/03/10. So it might be the one. Have a look at it and see.
Lyle...

Steven
That was a first try on the sign. Burned the corners badly. Never considered the pattern and how busy it was there. No pictures of the next step yet.

Lyle

Steven,
Looks like I have the same machine you do. Only had it for a week now.
I have been running my air assist while cutting at about 18 p.s.i. off my shop compressor.
As for engrave speed. I...

John
The trailer is 5' wide and I had 2" on either side to spare. The crate was just over 5' the other way.

Lyle

361142361143361144Safely off the trailer and in the driveway here. Rolled over a couple of sheets of 3/4" plywood to the ramp into the shed. Going to camp tomorrow so no work on the laser. Hopefully...

Doug, it would not have fit in the truck. It barely fit on the trailer. Thought we might have to take it out of the crate for the trip.
That's what you get for being a smart-ass and ordering all...

It's on the truck and about halfway home. Then to unload it and get it inside. Gonna be a long day.361116

Here is what it looks like.361081

Thank you.

Lyle

Not sure if my truck is going to be big enough, Just a 1/2 ton and 4 ft. wide between the wheels. I am bringing a low-slung trailer just in case.
Worst case scenario I rip the packing crate apart,...

Well it's off to Toronto tomorrow to pick up my new Ray Fine 7050. The four hour drive is normally not bad, but I have a feeling it will seem like forever tomorrow. Looking forward to the new toy...

Rich,
They used one of these types of laser to engrave those Pokeballs. They had a guy at the Toronto Exhibition the other year doing these. Got a small keychain with my dogs head done. Kind of...

Keith,
By "door trigger" I am guessing you mean the safety switches on the doors? Sounds like they need adjustment or replacement. Personally, for testing purposes only of course, I would bypass...

Bert,
The one you found the number for is a Ceramic Tile Contractor. They simply do installations of tile.

Lyle

I have a pretty good assortment of vibration isolation mounts kicking around in a drawer. Four of those on the compressor will cut the noise. If not, I will hook up to the shop compressor. I am used...

David,
If I use the blower that comes with it, I will either put it in the attic space over my workshed, Keep the resident Raccoons awake and drive them crazy, or build a box for it outside. The...

Erik,
I have no shortage of air compressors around my shop. Right from a 5hp down to a tiny one for brad nailing. I even have a converted refrigeration compressor I use for airbrushing. I will have...

John,
I would say a perfect translation.

Lyle

Jimmy,
In the Email Bryant said it was in Guangzhou already. So it looks like it's at port ready for the ship.
Lyle

Actually it was just shipped this past weekend and is now on the slow boat to Canada.

Bill
If you are referring to the mention of an environmental problem in my attachment, that is in reference to the NPC and CPPCC sessions their government was holding. It was explaining the delays...

John,
This (attached) was a reply to an Email I sent Bryant at Ray Fine about the subject. Seems they class that machine as an economic model. It would be nice if they clearly stated that fact...

The day of delivery approaches. My laser was shipped this past weekend. Of course we are talking about the slow boat from China, so it will be awhile before it actually gets here.
Bryant sent me a...

Brian
If you are looking for a supplier for switches here is a couple of choices for you:
http://canada.newark.com/eaton/7692k13/switch-toggle-4pdt-15a-250v/dp/04M4787...