I use blue shop towels, I seem to get better results with them then with the white ones. I hardly ever use a whole one at time, so I have them cut up into 6"x 6" quarters. Which are just the right...
Type: Posts; User: Len Mullin; Keyword(s):
I use blue shop towels, I seem to get better results with them then with the white ones. I hardly ever use a whole one at time, so I have them cut up into 6"x 6" quarters. Which are just the right...
Usually, if you go to the ER around here, you can normally expect a wait a minimum of about eight hours or more. Especially, if it's for a non emergency visit. It all depends on if it is an emergency...
Mark, I am truly sorry to read about you being injured, but, I am also very sorry to read that you blame everything that happened, on your router and how its speed is controlled. You must admit, that...
Ken, I agree with Brice, they are not all that hard to replace. If you could have gotten one, you could easily replace it yourself. I've never done it on a Delta motor, but I have on others.
Len
John, where is this school located, I've only ever read about it on here?
Len
Buy the cheapest can of spray grease you can, then give the extension a good coating of it. After you spray the extension, put it onto a large garbage bag and seal it closed. Then put it in the...
Ed, you should actually do more then just ask for permission, and take the person's word that you can use their design. To make sure your covered and protected, from being sued. You should only feel...
We usually have a nice big feed of corned beef and cabbage, along with a few green beer throughout the day. Plus we always wear green, that is something that we must never forget to do. The person...
Hello Izzy, I guess that I'm very fortunate with my planer set-up, straight from the factory. I've never had an issue with snipe on my 735 planer, either with softwood or hardwood.But, I am very...
David, it is an amazing feat, to be able to build something like this. Not only is it beautiful, but it is also functional. A lot of times things like this are built for looks only, they mostly just...
I think that you should check to see if it does fit, face-plate turning is much safer then using a mortise will be.
Len
Dean, if it was me starting out all over again, I'd do the same as I did this time. First I purchased a table-top lathe, and I had it permanently set-up on a Black & Decker Work-mate. And a couple of...
Mike, a One-Way tip should work, they're pretty much the same thing.
Len
Well as long as the info is still correct on the subject, it shouldn't make any difference how old the posting is.
John, I'm very impressed with your turning abilities, and amount of effort and thought that went into making this mirror. But I'm sorry sir, personally, I would have to place this particular mirror,...
Mike, they do state or say it in a couple of different ways, one by stating that it's M42 steel, and then other farther down in the description they state that M42 high speed steel makes the cut....
Mark, you should check out Alan Stratton's video, he posted this week on his As Wood Turns woodturning site. He built his own threading devise, that will thread north american woods. Woods that...
Ricc,is the live center and cone both, made by the same company? if not, that could lead to your issues. Or another possibility, is the cone and live center the same thread? Could one be metric, and...
Douglas, what size of hex is it, we need the size to make a proper recommendation? If it is the same size as the Forstners bits are, then extensions are available at lots of places. Harbor Freight...
Jeffrey, other then for the size of your lathe, that chuck would do what you need. But you would need to add a proper set of jaws, then you could use it. As it is shown it is in need of a set of...
Andy, I like your needle cases, would you have any pics of the magnet installed?
Len
Jenny, I would use ABS or PVC fittings like your thinking of, and the one I would use would depend on the wood. If the wood is light colored, I would use the PVC fittings. And if the wood is darker...
Alan, wouldn't gluing a magnet into the base, make it difficult to get the needles out of the case? It would have to, it would be what the needles rested on when stored in the holder. Plus, when you...
Kevin,don't bother wasting your time trying to fix this grinder, it's eight years old, surely to goodness you've gotten your monies worth out of it. Buy a new one, it's about time to replace your old...
I agree with this statement, I have no issues or complaints concerning my 735. Yes, it's a bit loud, but not to loud if you use hearing protection. And I do wear hearing protection, I put it on as...