Search:

I am interested in this bench. Has anyone had experience with it.
Any info would be helpful.
Thanks,
Mark

I am working on a project that requires about 1/2 sheet of QSWO (5mm).
I would like to avoid having to buy a full sheet at approx. $95.
An internet supplier would be convenient.
Any suggestions...

Thanks John.
Thanks Mark. I appreciate the physics lesson.
My post must have been confusing.
Here is a summary:
1. D/C unenclosed=hecka loud.
2. D/C enclosed in insulated closet=hecka quiet.
3....

I used an inexpensive digital sound level meter. I used the same meter both before and after enclosing the unit. I measured 104 dBA at about 5 feet from the exhaust. The meter does not have...

I recently installed a 5 hp SDG in my crowded two car garage shop of approx. 475 sq. ft. The first time I turned it on I could not believe the noise (104 db) as well as the turbulence from the...

I am considering either the Oneida 2hp portable or the Laguna 2hp portable. The Oneida has lower CFM due to the HEPA filtration. The Laguna has higher CFM with filtration to 1 micron.
My dust...

Jamie, that is the general idea but I have no way to add the rebate to the drawer sides. I need something rated at 50lbs at least.
I appreciate your help.

This is my first post but I have been lurking for a long time...this is a great forum.

I need to retrofit some damaged drawer slides. The drawers need side mounted slides that will fit in a 7/16...