Search:

Derek, good choice with the change, both for stability and for, um...the height adjustment. :) I'm actually impressed with the width of the base on that tool and the fact that it appears to be a...

Dennis, you can still take commissions on longer tables...but there will be a substantial premium on the cost because of the extra work and labor cost to handle it...wink, wink...nod, nod...

It...

YouTube is going to be a whole lot better over the fiber!

I agree that the modern fence on the outrigger is a useful thing. That saw is looking great to-date!

Classic design and well executed. It's an easy design to use as a base for alternative versions, such as with a wider apron and a drawer and/or with a lower shelf, etc. You can vary the look with...

Laying them out flat or hanging them flat over the edge of a container doesn't necessarily mitigate the risk...they can inadvertently get moved by brushing by them or air movement from say, an HVAC...

I wonder if in some jurisdictions that are pretty strict on this if one might have to do dedicated circuits for specific machines to address the issue?

It's relatively new to the market, I believe, but Kreg generally has quality products. Just remember that when you get involved in a "track" type system, the word "system" is important since you may...

When ordering from Amazon, it's generally best to buy things either sold directly by Amazon or stocked and shipped by Amazon for third parties when processing and delivery time is important. I often...

That's almost identical to what I do as noted above, Ken...including the gloves!

Yea, it's always been a stated warning with drill presses to avoid mobility, but reality is that many folks need to move them from time to time. My opinion is that a mobile base that gets the tool...

Those are shavings that seem to indicate there was a nice shearing action by the cutter which is to be expected from sharp, helix type tooling. You can't prevent it and it's actually a really good...

Glenn, it's such an easy thing to overlook even when someone is generally pretty anal about it. "Oh, I'll take this outside when I'm done working today"...and it's still there on the bench all wadded...

The only place I use task lighting in my shop is at my band-saw (because of the nature of the machine) and over my smaller guitar focused bench because of its location. The former presents a...

For the boards that use a lot of very small parts, the risk for movement, while still there, is greatly reduced due to scale...the movement is very slight. Glue adhesion is probably more of a...

We occasionally have conversation about this here at SMC, but this is a good reminder that it truly is important. Yes, a lot of folks have never experienced it, but it only takes one time for...

I'm thinking that someone would need to build a shop extension just to house all those choices!!! LOL

I believe the original incentive for the adoption of Arc Fault devices was to guard against frayed wires, such as extension cords and the like...a common problem in rooms like bedrooms and other home...

Tom, fiber is likely the ideal choice for these runs because the distance limitations on fiber are substantially longer (even for multi-mode) than for copper and wireless hits a performance wall that...

If the mahogany is fully and completely stripped of previous finish, you can use either a stain or a dye...or both...depending on the look you want to achieve. I often apply an amber dye to mahogany...

Just under 700 lbs for the machine plus the weight of the pallet and packing for delivery weight.

Work triangle is important, both in my shop and in my kitchen. (I do the cooking...except for Sunday nights which is Professor Dr's SWIMBO's meal responsibility shift ) So I can appreciate your...

Fortunately, set screws are easily obtainable from TrueValue and other hardware retailers...you just need to determine the threading. Take the part with you so you can work that out in the store.

I sadly have some experience with termites. The act of stacking the wood isn't the only issue....if there are termites present and there's a path to the home (including a deck), they are going to try...

Dang...great deal! Congratulations!