Search:

Yes after reading the replies I did order the wrong meter (0-30 amp) not MA and it came with a shunt. I reordered a 0-30ma meter that does not come with the shunt so I will assume It will not take...

I got a analog amp meter with a shunt. Anyone have the proper way to install with shunt
Thanks in advance
Mitch

The one I wound up getting says 80 watt. Adding ammeter so I can set power supply

Thanks for the replies

Need to replace my laser tube and my power supply says 100 watts but the 100 watt tubes that I am looking at are about 57 inches long and mine is about 47 inches long which what I am finding is 80...

Thanks I will try an figure out how to do that

I am still learning this an still do not know how to achieve what you are talking about. When the powder coat burns off their is only stainless shown underneath.
Thanks

These will be done on a teal green powder coated cups so the stainless is all that will show up

Any ideas on how to get this logo to look right on a powder coated cup with the 2 colors overlapping ...

Which 100 watt machine is it
Mitch

If you are talking about the water pressure switch it should be in one of the water lines, find it and just bypass it to see if it fires then
Mitch

Check the water flow switch. It will not fire if its not working
Mitch

I found what I need thanks everyone
Mitch

Now the problem is finding the old brown Federal Pacific stab lock 2 pole 20 amp breaker. The place was built probably early 70s or late 60s and I have not had any luck finding the breaker. Any...

It says nothing about amps unless is in Chinese

Yes they are 110v an I am going to run a separate circuit for them
Thanks Mitch

Anyone know what amp service I should use for a 100 watt C02 laser. Mine came with the 110/220 converter and I would like ton run a new 220 line from panel and not use the converter. I am thinking I...

Next time try starting at the side that you are having trouble with and work your way back to where you used to start. Your mirrors could be out of alignment from one side to the other
Mitch

Thanks Kev

How do you apply it
Thanks Mitch

Can anyone add to this post with recent info
Thanks Mitch

Thats what I was kinda thinking also Dave
Thanks Mitch

The last time I used the search feature someone chimed in an said start a new thread because that one was a year old. Which happened to be my first post on here.
Thanks Mitch

What are the ups an downs of small footprint vs larger footprint and wattage of machines.I other words would you buy bigger now if you have a small laser or if you have a big laser would you buy a...

Make sure you get all the FDA stuff in line also
Mitch