Search:

The cyclone is mounted to the top of the bin, I do have about 8' of 8" hose coming off the top getting reduced to 6" right at the blower. The system is much tighter now than before (I re-sealed every...

The dust bin is 53"x40" in a corner, it is triangle shaped. It is 40" tall and made from 1/2" osb. I caulked every seam. It is a ebay metal unit with a 6" outlet. My problem happens when running 12"...

Thanks for the information, I'll come up with a test of some sort or just completely redesign and rebuild my collection bin.

No it's more of a triangle, does the cyclone's action have to continue into the container?
Dqave

I have a 2 H.P. Grizzly dust collector with a cyclone mounted on a large dust bin. I had the cyclone mounted on a 30 gal garbage can and it worked well except for the fact it would fill much too fast...

Try this Woodturner's workshop. Hosted by Brian Clifford's woodturning resources.

Logosol makes a small unit (available at Baileys) It consists of the controller and a drying unit. You build the chamber out of foam board and I would guess you could configure it any way you wanted...

I don't recall where I bought it but I have a short (8") bed extension that is attached with a hinge that will pivot 180 degrees. You slide the tailstock on to it, pull a pin and flip it out of the...

Thanks for the quick replies. They both make a lot of sense. I could buy the larger unit, off mine on craigs list and have the same out of pocket. Now for the duct size issue, I just (6 months ago)...

Hi
This is my first post on this site although I've been lurking and learning for a while now, I hope my first question isn't a flat out dumb one. I need to upgrade my dust collection, I have a 2hp...