Search:

Same here.

That was exactly what I thought when I read the description.

No, A properly rebuilt starter should be as good as a new one!

An SDS Max type hammer drill should drill through the rock with no problems. Like said above if you drill several holes you should be able to knock the top of the stone off. A horizontal top on the...

The standard height of most table saws are kind of too low for a router table in my opinion. Working on a router table that is the height of a table saw top is quite literally a pain in the back.
...

479539

479540

479541

479542

$80 for the fence off ebay. Considering the time it would take to build one which would probably not be as useful the price doesn't seem too bad. I bought...

This is my acquisition for the day:

479473

479474

479475

479476

Yes, that is what I was referring to. The big box that says do not turn this wheel. I agree that it appears to be a good place to mount the VFD.

A motor contactor is a big relay that engages to...

So the seller is betting that you will miss any single payment in the next 2 years or not be able to finance it in under two years from now and they will walk away with your $15K and monthly payments...

Another possibility to consider:

479014
...

GREAT JOB!!!! I sympathize with the ton of effort and extraordinary patients all of that took! Please let us know how it all plays out. Please keep in the back of your mind the state agencies that...

The Hitachi WJ VFD's are considered a premium VFD. I have a couple and they are the only ones that would not work directly out of the box without setting a couple of parameters first. Setting the...

I picked up a brand new (never used) Porter Cable 7539 3hp plunge router with a Router Raizer installed and the original router plunge springs loose in the original box at a Habitat for Humanity for...

A lot of my routers are old to quite old. When I initially seat a bit in the collet I always make sure to pull it up an 1/8" or so before tightening the collet. When it comes time to remove the bit...

I think your best option is to pay the ransom at the dealer and get a new fob from them.

What kind of car is it and how old is it?

Some fobs can be easily replaced and some are just darned expensive. What ever you do stay away from the auto lock guys in the phone book. I had a...

For me it depends on the particular wood, the particular joint, the type of glue and how much stress the joint will be under. For a joint that will be under a lot of strain I will apply glue to both...

I would love to see a picture of your old jointer!

I love old iron too. I also post on OWWM but it isn't nearly as friendly of a forum as it is here.

For grain raised by paint I would just sand it before putting the next coat on.

To patch and fill voids I prefer good old Bondo. It cures in 10 minutes and can be easily sanded. In my experience...

Spar varnish is generally used on boats where there is a lot of sun exposure. It will add a yellow tint to your white paint though.

I would answer... because the hole they are covering is round! ;)

Annular cutters are perfect for such projects!

https://www.amazon.com/Annular-Cutters/b?ie=UTF8&node=340028011

You can usually pick up odd sizes on ebay for cheap.

If you don't want to rent...

The attic of my house makes a good kiln for drying wood. Put the wood up there with a fan and it dries pretty quickly.

The fence on my Redstar RAS is similar. Instead of a piece of aluminum extrusion backing the fence I just have a jointed and planed 2x6 screwed directly to the back of the table. The sacrificial...

Thank you! The pictures don't really do the Redstar justice. In person the Redstar is decently bigger and beefier than the Delta but the Redstar just has a short arm. The table on the Redstar is...