Thanks everyone. once I got a properly sized drum and sealed the lid, all is good. The downside is that now I have to empty the bin.
Type: Posts; User: Eddie Barrett; Keyword(s):
Thanks everyone. once I got a properly sized drum and sealed the lid, all is good. The downside is that now I have to empty the bin.
The bin seal is probably the issue. The bin lid is 23" diameter and the plastic drum bin is around 21" diameter and the lid is just laying loosely on the drum. I will get a 23" drum and try again. Do...
I bought an older Dayton Cyclone dust collector. I believe it is 3HP and is all steel. There is plenty of suction to remove chips from 16" jointer and 13" planer but it is not separating chips and...
I have a Delta 1440 lathe (46-715?)that has been very noisy since it was new. Today, I finally put a dial indicator on it and found that there is 0.040" wobble at the outboard end of the headstock...