Hello, There are millions on the East coast built out of pressure treated pine, look at the hidden fastener systems make the job look much better.
Type: Posts; User: Jimmy Smith; Keyword(s):
Hello, There are millions on the East coast built out of pressure treated pine, look at the hidden fastener systems make the job look much better.
Hello, Shorten the ones you have on a grinder, just don't get them too hot, well worth trying.
Hello, I found a good picture of guide on ereplacements.com, the hard part of making one from scratch is the hex parts of the guide, might could make one with round holes and replace the shafts it...
Hello, Most of those old deltas had a different type of tire than most bandsaws. There is a groove in the wheel for a tire that has o-ring looking piece on the inside of the tire that makes the tire...
Hello, Motors are identified by Frame, Voltage, Rpm, and Shaft size and Revolution, there are thousands of replacements available, look at tag on your motor, check places such as Surplus Center,...
Hello, Attach each stave to the metal rings with a small screw before you cut it apart and it will stay together. Good Luck Jim
Hello, You wil be greatly disappointed with the finish from the straight knives, I bought one and didn't use it thirty minutes before I ordered the byrd shelix head. I've used it on all types of...
Hello, I haven't worked on a dj-20 but it is possible the blocks have a snap ring to hold them in place, look close on inside of bearing block, if no snap ring is in place they should tap off with a...
Hello I have several in my shop,they feel very good under my feet but they are not for rolling heavy tools over, easy enough to move them and then put them back in place. They sweep off very easily...
Hello, All I can add is when you do something you sure do it FIRST CLASS, Do you have any pictures you would share of items you made before the fire? Thanks Jim
Hello, Steve in Durham try Agri Supply in Garner, they have pipe but not fittings. Jim
Hello Dave, I just want to say that desk is awesome!!!!!
Hello, I don't have any experience with them but if you will check out this website of my buddy's you will see what a first class wooden boat builder does with them www.brushcreekyachts.com
Hello, I have used this on my new shop floor and it did a great job, I waited the required sixty days for it to cure, cleaned with the supplied cleaner and it came out great, cd included to show you...