Search:

I have used the brown paper bag rubout on several ARS Satin finished pieces. I waited 4-6 days (because I could) and the results were lovely. I don't think you need to wait for "full cure" but...

John,

Again, I thank you for sharing your knowledge and providing me with some clarity on the cause and future course of action. Your assistance continues to be invaluable and is needed and...

John - thanks for replying,

Yes, as far as I can tell it is a Ford #4 cup that was provided by Fugi at the time of purchase. I just ran another five time trials and they all came in at 16 to 17...

Yes, both from the can and from the cup (T70 has a strainer). I really don't believe it is dust, Finishing Room is really clean and it appears to be a fluid issue.

I Phone quality photos

Help me please, I am attempting to spray a coffee table top (3' x 6') with Enduro Var II Satin using a Fugi 4 stage and am getting really small (less than 1/36" diameter) but totally aggravating...

Mike, as always, nicely done.

Outstanding piece!

Checks all the boxes; Design, Material selection, Craftsmanship, Function & Finish.

Kudos!

FWIW - approximately a year ago I replaced two semi large flat screens after performing an insane amount of research. General result is;

Samsung QLED- better for areas with brighter ambient...

That will work fine, it will be only be 15 minutes out of your way and I am almost always here these days. I'm assuming you are coming up August 22 as today is July 24th?

Steve,
We are in Issaquah, about 1 to 2 hours south of Bellingham depending on traffic & time of day. Would be happy to have you visit if it works for you.

I have been wary of using any kind of wax on my A-41 for fear of it affecting the finish. Any reality to my fear?

I would use Multiwall Polycarbonate for those Clerestory windows.

Layoff the elevation of the existing footing to "line of sight" stakes. Use as many as required to circumvent obstructions.

Scott,

Absolute homerun! The chairs check all the boxes; design (aesthetics & function), material selection, construction, and finish. Actually, they excel in all categories.

Additionally,...

FWIW - These are the Hammer Specs for the A3-41;

Cutter Head - end to end = .004"
Cutter Head to Outfeed = .028" to .010"
Table flatness = .010"
Jointer Fence = .006"
Planner Thickness L to R...

ditto for me.

I am a fan of the DeWalt 611, I have three and wouldn't mind having one or two more.

My best guess from far away is that you are correct in your assumption.

Let us not forget "Rocky Horror Picture Show".

Sweet, good on ya!

FWIW - Costco's Headquarters are approximately 2 miles from me (moved from Kirkland to Issaquah) as is their flagship store where they stage for all their stores. Allways a pleasant experience and...

this is what I used as well. Worked beautifully, no complaints.

I have a problem with all encompassing statements of any kind (pro or con). Please take a look at this previous post.
...

I fully agree.