Search:

Thanks for the response. I have great luck with spraying SW Emerald urethane without thinning for exterior projects. In Maine weather it looks great for years. I would use this again if i wasn't...

I am making a small batch of kids picnic tables and need r4ecommendations for paint. They each need to be a different color and I like to spray instead of brushing. My requirements: waterbased, OK...

I went through a broker & after looking at my situation they recommended not to purchase an advantage plan

Great job. You should be proud.

I would cut simple shapes first to check the calibration. Rectangles, triangles & circles. Cut a specific size then measure the actual size.

Many people here say to purchase your second CNC first. I am doing the exact opposite. I purchased a cheap 40mm x 30mm from China. Total cost for everything need to get started was under $800.

My...

Thank you Brian. That article really helped. Time to make a prototype.

I am making some trim rings. 3" diameter circles of 3/8" maple. I'm looking for suggestions as to the best\safest way to round over the outside edge.

The current plan is to use the router table...

I started using it about six months ago. So far, I am very happy. I had been using Renaissance Wax before switching.

I have been using domino's on many projects recently and expect even more coming up. Even though my workbench has the grid of 20 mm holes, along with every appropriate clamp than I can think of, I...

I do the same as Lisa. I order online, with free shipping to closest HD. Shipping is usually only a couple of days. Never has an issue with damage.

Before Badger Pond there was a woodworking group on CompuServe. When they shut it down a bunch of us migrated to Badger Pond.

I like to spray and use water-based. I am much better at spraying than brushing.

Thank you John.

After discussing with Jeff from Target I decided to use pigmented lacquer with the 9300 clear coat. He pointed out that being outside for approximately three weeks a year isn't...

Thank you for the information.

I think that I have it figured out.

Looking for suggestions as to the Target Coatings product would be best for exterior use. I contacted them via email & voicemail but have not heard anything back.

I am building a sleigh for...

Thanks, it worked great. I just rinsed with water and after it dries, I will reglue.

I am making a few jewelry boxes for presents. I used quick set epoxy to hold the splines in the corners of one box. After two days it never cured so I removed all of the splines. Any suggestion as...

A few years ago I started buying all gas for small engines at an airport. No ethanol. All of my fuel related issues went away.

IMO the result will depend on the shape you are in before the surgery along with how hard you are willing to work on your rehab. I have had six surgeries at L5-S1, including two fusions. I developed...

The tire on the top wheel of my 30 year old 14" Jet bandsaw came off while cutting today. I am not sure if I should just put the tire back on or replace both tires. If replace, what kind of...

I love the William NG design. I built the template, gathered all of my plywood scrap & made about 150. 3/4", 1/2" & 1/4", basically all of the stuff lying around. 1/4" is the least useful. I mostly...

Sawmill Creek is the absolute best forum that I have participated in. The mods are wonderful & do a great job of keeping the threads focused on woodworking topics. I appreciate the work that keeps...

I wish that I could say yes. Back to the sneaker net.

I purchased one about 18 months ago. After a bit the lights indicated that the barrel was full when completely empty. It even said full with the barrel removed. I contacted them and they sent me a...