Search:

Plywood, An rv will change elevations and moisture levels often if its used. I figure it will be finished but ply will be more stable

I think the idea of that device is to monitor your money going down the drain amp draw isnt as important in that regard

Still kicking myself for getting the 31 over the 41. At the time it was $1,000 difference. Only thing i have to say is make sure you keep planer table lubed, the cast seams to absorb it pretty quick...

Malcolm I believe that measures KW usage. A clamp meter can show you amp usage while the tool is running but you would need to clamp each hot lead that goes to any particular tool. If you have a sub...

youtube mouse traps. you'll get a lot of bucket traps which seam very effective and you can make them humane or inhumane depending on your preference.

I only get 1 or 2 every couple years

Havent calculated the savings but we keep house at 68 and raise to 72 5-10 pm and 6-8 am. Temps are a little high for me but have little kids. all of the temps are livable especially with blankets at...

Do you have a picture?

I've made a load of cutting boards 60+. And people always say they dont want to use it, especially family.
Please use it, using a nice hardwood board is very satisfying. In a couple years when its...

Looks Good. What was your finish?

Boards and beams is pretty good for in NJ. Their prices are not too bad. If you spend 1500 or so they will give you contractor discount.

I really like Hearne in PA its probably 3 hours from you...

My guess is that it isnt steel, probably cast, Steel would have rusted out pretty quick. I would use a ratcheting snap cutter if it is in fact Cast iron. Cast will kill drill bits and torch wont work...

I would look at safety deposit box. If you are looking for absolute protection, I dont think that can be had for under 500.

If fire is your concern they have bury in the backyard safes that are...

the other problem is some of these breaks are before the valve.

Most codes call for underground pipe to be buried below the frost line but a place like texas probably has a shallow frost line. A...

I bought the Yaktraks a few years back for a winter trip to yellowstone. They broke a couple hundred feet in. I was able to replace them in the park. Im not sure offhand what i replaced them with

-Shooting/reloading mostly pistol lately but some long range
-Fountain pens
-photography(wish i had more time for this one)

With kids and work dont really have time for any of them.

Out of the 5 I got I lapped all of them from 1000-10000. It took minimal effort but they werent dead flat at least the 1&3/4 were not. They were functional and sharp though

My sawstop dates back to 2016

My fathers tools which were all from the 80's were gifted to my grandfather because he had the time to use them. When I bought a house and my grandfather had passed I...

When i do the handles I usually hit it in 4 increments the final increment only being the last 2% or so it should eliminate burning.
And for sanding I have a dowel about the size of my router bit...

I kind of did both. Jessems stand has slots for 1/2" ply. I added a box to house the router a couple of drawers and a door up front to access router for speed control
452653

Ive only been using rotex up to 120 then switching to standard at 120 then progressing. I recently picked up a mirka 5/6 combo but havent put the festool power adapter on it yet so havent tried it...

The led replacement bulbs i went with for our warehouse were good. They bypass the ballast jesled was the company.

You cut the wires to ballast and rewire direct from line voltage to the end...

I think with a lot of people finding they have more time on their hands more people are in the garage. Plus stimulus checks probably went to LV or LN

I just hit the mega million. Im still not sure what im going to do with my $4 though. These are all good ideas but I think I may not have won enough for any of them

Overarm sold

Blade guard available

steel does get work hardened.

Milwaukee has some new bandsaw blades i bought in a pinch this summer. the box said it was good for thick steel but the teeth looked agressive. and they were...