Search:

Brian,

I had the same issue when I first started using the Domino. It's has been already mentioned but again, make sure the work piece is hanging over the table and the fence is not hitting the...

Thanks all. It was a fun project. I already finished the sides of the dresser and just started the dust panels.

Hi folks,

I'm looking for a place in the Jacksonville area that sells rough sawn soft maple. I live in the Savannah area and the few place all sell it s2s ot they are out of stock. I will be in...

It's going to cost me more to fill than to build it. :D

I asked here and someone suggested this place. I normally get it in PA where I lived but for the price I had to stop by on my way back home. He let me store the wood until I came back to SC. They are...

Hi all,

I finally finished the wife's Lingerie chest. After much help here on the forum I'm happy using under mount drawer slides with insets. This was my first time using this method.

It's...

Malcolm, I've only purchased the ROM sandpaper to which I think works very well. I bought a 3 year supply for sure.

Joe, you are a better man that me. I think Richard's comments were a bit snarky and not helpful. I bought these from a recommendation and they work well. I purchased the 5" 8 hole for my random...

I just checked this out. It does not seem to be opened to the public. You need to be in the trade as it asks for company name. Any way how to get around it? I live 4 hours away and would love to see...

After installing the missing plug, it did not work any better. Oneida asked me to take some pics of my unit. After reviewing my pics, they had an issue with the gasket seal on the unit. It was a...

Dan,

I'm no expert on vacuums, but I would think with the ampont of air flow that my vacuum is sucking I should feel some type of air flow though the 5 holes as I do with my old unit. I can lay a...

Hi all,

I purchased a new sander to replace my 20+ year old Dewlat sander. This one came highly recommended. My issue is when I plug in my vacuum I can hear the motor straining as if I covered the...

That's what I built. It rides on my fence and I clamp the work piece to the jig and the edge rides on the table. I guess my confusion is I'm using a Wixey gage and when I put it on the blade it reads...

Hi all,

I'm making a top to a dresser and the plans call for a 37 degree bevel cut on the underside of the top. I have a jog I built years ago that fits on my fence. My question is how to tilt the...

It seems I ignited a storm. But it is good to have a conversation and discuss everyone’s opinion.

So, I ordered the Byrd head, and it came on Thursday. I installed it today and it took about an...

All my wood is stored horizontally on wood racks mounted to my wall. I had no problems for 2 years until now. Hope the Byrd head works with no issues. I have no room for a floor unit.

Do you have the Byrd head in it?

Patrick,

Thanks for the link. It's an excellent price but it does not show who manufatcures it. I found the Byrd head at Holbren for $399 and free shipping. I've bought lots of stuff with them...

To answer some of the questions asked. I have min gorilla for dust collection. I looked at the Shop Fox, Grizzly and Jet. Too many comments on sniping and insert issues. I checked out the Oliver unit...

Hi all,
I posted last week on an issue with my DeWalt 735 planner. I’m getting ridges on the wood and while they sand off easy, it’s a concern. I’ve had this machine 2 years with no issues and after...

I find it hard to believe that the original set plus the new set I bought have the same issues. I can turn these around and see if it makes a difference. I was hoping someone with this planer had the...

The ridges are raised above the board and on the top. These were already planed boards and nothing was on them. The old knives did the same thing so that's why I replace them. I also bought Dewalt...

I've had this planer for a few years and it's worked well. I started getting these ridges in one area and now it's across the board. I replaced the knives and cleaned all the roller but I get the...

I made mine out of beech. Used it for 10 years without an issue. Easy to just make your own. I sold the machine last year when I got a domino.

Jim,

I bought stuff from Hearne too. Mostly 8/4 stock, and yes, I found them very pricey and very happy to empty my wallet. When I lived in PA I had a lot of small mills all around me that...