our wood turning club just bought a 55 gallon drum of it from uc coatings they sell it on line here is a link to them
https://uccoatings.com/shop/product/anchorseal/
Type: Posts; User: Keith Buxton; Keyword(s):
our wood turning club just bought a 55 gallon drum of it from uc coatings they sell it on line here is a link to them
https://uccoatings.com/shop/product/anchorseal/
here are the spec on the one I got and works fine it is Thomas 2660
RANGE TECHNICAL OVERVIEW:
Max Flow 4.6 cfm / 130 l/min
Max Vacuum 27.1 in.Hg / -920 mbar
there is a club in Brooklyn here is the info on them also a couple on long inland look on the aaw website https://www.woodturner.org
Big Apple Woodturners
Brooklyn
NY
United States...
started out with a general midi and turn and turn on it for about 5 years an then bought a grizzly G7066 no regrets great lathe. why I bought it was the price bought it back in 2015 and paid $1667.00...
here is a very inexpensive light that I use on my lathe cost is lest then $25.00 all you need are these two items the lamp comes with a cast steel base that you discard and mount it to the magnet...
I have had my G0766 sense 2015 and turn on it almost every weekend about 95% of my stuff Is segmented turning. I have not had any problems with my lathe. I was the 2nd person in or wood turning club...
john there is a local woodturning group near you here is a link to their web site http://www.alabamawoodturners.com/ looks like they meet the 2nd Saturday of the month this ill be a great place to...
Dave,
I have had great success using artisan dyes from craft supplies usa they are a alcohol based and require no mixing here is a weed pot I did out of maple
John
i will have to agree on the length of the vase from a log but if you are looking do segmented vase then you should be able to turn a 21” to 22” vase with out the extension and yes I have a...
John,
our wood turning club just bought the G0838 and I own a G0766 the club placed the order back in march but just got the lathe last month. I was able to turn on the 838 last weekend and was very...
steve if it has a 22" swing over the bed it would be the G0766 that is the only one that has the 22" swing. the G0733 only has 18" and is the lathe that came out before the G0766.
made one my self and used these best thing is they are 5V so I used a old cell phone charger works great
...
I am with david without a picture we have no idea what tool it is could be a bowl gouge spindle ,scraper parting tool they all have different bevels thing to do is find a wood turning club near you...
I like that may have to make one for my grizzly
I made a set for my grizzly a few years ago and installed them on the inside of the legs so when I slide the head down and stand at the end and turn bowls they are out of my way and great for tight...
copied this from grizzly's web site when you check availability. Order today to secure your spot in line and lock in this price. Your credit card will not be...
I have to agree with John Keeton's reply location is the big factor on what you can sell your stuff for. I live in the Midwest and am luck o get $30 to $40 for a nice 10" walnut bowl at a local...
I would have to agree with John's list and would say the one thing that helped me the most was to find local woodturning club. most members of a club are glad to help out new turners you can look on...
Looking at the wiring diagram and pictures of the head stock on line you have 3 switches a 1 pot one switch is for fwd and rev another is main on/off switch and the last is emergency stop switch and...
if you are looking for a friction polish here is one
4 oz -- Zinser Bullseye clear Shellac
2 oz – Denatured Alcohol
½ of a small bar of bees wax. The bar of wax is about a 1 inch...
Mike,
I see you are in Evansville Il Their are 2 clubs in the St. Louis area the showme woodturners meet in Festus MO the 2nd Thursday of the month at 6:30pm and the st. Louis club meets on 4th...
David,
if the spindle is a true MT2 you could try this and then you could screw a chuck on to it
https://www.woodturnerscatalog.com/p/195/4287/TMI-Reverse-Chucking-Alignment-Adapter
Kevin,
I have started using the titebond Translucent it dries clear. I have found it at Menards. I have used all of them and have found that III discolors my joints of the semented cherry bowls...
As a owner of a grizzly G0766 you may want to look at one of these at a price of around $1600 and a swing of 22" you can't beat it. I have had mine for 3 years and have not had one problem with mine.
I remember that feeling have a fun time with the new tool i have had mine for 2 years now and have had no problems