Search:

Hi All, I’m looking at about a 5KW heater for my small 250 square-foot insulated shop in the Seattle area.
I found a product from King that is $1400 and has a remote. I would like a remote. I can’t...

Lisa, one other question. I have a Sawstop router table with a 4 inch port underneath, and a 2 inch port on the fence. This sounds like the same balancing act you are doing on your slider. But you’re...

Thanks Lisa and Dave, this is what I needed.

Oneida supercell turbo or not?
I have a small shop and the Oneida Supercell looks like a good fit. I noticed they dropped the price on the non-turbo version and I’m trying to decide if I need the...

I noticed they dropped the price on the non-turbo version and I’m trying to decide if I need the turbo version. I am a small shop one person everything is 4 inches or less. I have an 8 inch Joiner...

Hey Matt, good question. No the shop is super clean. Vacuumed up and blown out.

I think I will try incense and see if I see anything. I replaced all the gaskets and tightened it all “just right” and the smell is still there.
maybe there’s some residual smell but I don’t think...

Good to know on the V 3000 gaskets. I do feel like I’m playing whack a mole with their gaskets and plastic flanges so I will look into that. I’ll also look into that particle detector, it would just...

This unit worked great, now it smells like dust in my shop running the dust collector without any cutting happening. I found a bad gasket and replaced it. I cleaned the filter well per Oneida's...

Thanks all! Full site was the answer, which I was able to do on my phone. Done deal.

I have looked and looked and cannot find how to donate. I don’t have a gold button in the light blue banner. I’m on my phone if that makes a difference

Shims! Much easier than making and storing bowed cauls.. Thank you

Johnny, I've seen cauls on youtube. Sometimes people put a little curve in them. Do you think that is necessary?

And yes I’m waiting for a woodworking son-in-law for glue up. I know better than killing the marriage over this one😐

Yes 1/4 in back in a rabbet. , I was going to use quarter inch crown staples five eights inch long and maybe a little glue. Wondering how much glue if any and if I glue or staple the back to the...

Good grief I wish I’d asked this earlier. I’ve been cruising through YouTube and the Internet. This is great. Thanks everybody. I might add a cleat or a stretcher, I’ll see what it feels like when I...

The gaps I’m pulling closed are maybe 1/8 in tops

Thank you! Yes, I already cut the dados. 5 shelves plus the top and bottom, so averaging 10-12 inches apart.

Building 6 ft high, 28 in wide, 12 inch deep solid 3/4 inch walnut bookshelf , no adjustable shelves. I have dados for all shelves. The sides are a little bowed, requiring some pressure with clamps...

What do you all think about putting a little bathroom exhaust fan close to the dust collector. I have an outside wall I could do that with just to pull the heat away. I’m just installing a 3 hp now...

Same with the Carter Magnafence and FAST system. I bought all of it and sent it back. The Magfence was way out of square and by the time I used the leveling screws to get it square with the table it...