Search:

We’ll that is significantly cheaper. Maybe I’ll take a run at Siko and see if they can give me a better price. If not I’ll likely go with the Proscale too.

Im just thinking about the fences and their flip stops for now. I have bolted my Incra positioner to the outrigger table in the past. It’s ok but I would still like something a bit better in the...

So how did this all work out you might ask.

Just excellent. I built a plenum withe cheapo furnace filters to catch most of the overspray before it gets to the fan. There is plenty of airflow but...

That spider is pretty cool. And time consuming I’m sure.

Great! Electronics, that's above my pay grade.

Lambtoolworks got back to me. They don't offer a system for the MM slider. I called Siko, they are very helpful and have done this application quite a bit. I'm getting some prices and technical...

Yeah I saw Sam’s mods. I was hoping to just buy a solution but it’s definitely an option. And likely a bunch cheaper.

I saw that. But it says the parallel fence fits both Felder and MM. So maybe there is a chance it can work on a MM.

Does anyone know if the Lambtoolworks digital flip stops work on a MiniMax saw? I have a request into the Lambtoolworks site but I thought someone here might know or know of a retrofit.

I know your actual tool layout isn't reflected in your model yet but one thing I think could have improved my new shop addition is:
I have my garage access door like you off center on the gable end....

I don’t have a return baffle but I do have a filter plenum. I lined that with old shag carpet as recommended to reduce noise. I don’t think it made a ton of difference. But my cyclone is in an...

Not to speak of closets but I find it pretty funny that most of the pics of peoples dust collectors and piping show that the outside of the dust collector systems are covered in dust.

I just use the suck your tape measure up method.
And my particle counter.

Thanks for posting this. I really like the design. I put it on my next up project list.

So just surface mount all the boxes. You can tap into them with conduit anytime you want in the future. Its seams like a lot of waste for something that might happen in the future.

I really don’t get all this conduit stuff. I used pvc conduit in my last shop because the walls were already finished. I used metal in the previous place also because the walls were all finished...

I have a ClearVu. It has been fine but if I did it over I’d likely go with an Oneida or a metal ClearVu instead of the MDF ClearVu. I like the idea that ClearVu credits Bill Pentz for his pioneering...

I order 10lbs of clean sweep to try.
as a kid I vividly remember the local small time grocery store run by my grandfather’s cousin. “Trig” would sweep the wood floors with a red compound that had a...

Time to get diesel for the Kubota!

The Makita is an interesting option. The reviews I read don’t sound all that encouraging though. Even used they are expensive

I’ve pretty much concluded that I’ll stick to water base finished with an occasional rattle can of something. The fan is supposed to flow 2077 cfm which will give me 33 air exchanges per minute. I’m...

I would like this if you still have it. I'll send a pm

I also made the front curtain short enough so I can reach under it while standing outside the booth. Kinda like a bio glove box. I don’t know how much I’ll actually close the front curtain, but it’s...

Here’s a pic of the fan I have on order. I’m hoping it is actually explosion proof as advertised.

On the robo vac, one thing that you should know is that I keep my shop floor (and really the entire shop) clean, I mean super clean. The only thing the robo vac would get is what the dust mop gets...