Search:

Type: Posts; User: stan kern; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. got an email from the dealer and Bodor is...

    got an email from the dealer and Bodor is considering replacing the controller, so we'll see how that goes, the last time they helped with a power supply it took months
    but its positive direction...
  2. I spent 2 skpe calls with bodor trying to prove...

    I spent 2 skpe calls with bodor trying to prove what was wrong, last one was
    2.5 hrs and the engineer finally admitted it was a controller and relay
    Then he advised me I had no warranty left they...
  3. I appreciate all the info, I will be looking...

    I appreciate all the info, I will be looking around to use the rest of the sheet
  4. it was a bad relay , that was causing the alarm ...

    it was a bad relay , that was causing the alarm and the controller has an error as it will not allow a computer connected via USB
    no communication laser will ,not run
  5. bodor laser x1006 24x39 inch bed 150 wat 5200 cooler

    looking for ideas of what could be wrong , as the laser tube is not firing:

    --all power supplies are running , green led's showing green, laser tube
    power supply fan is running looks ok...
  6. Keith is right, I purchased a 4x8x1/4 sheet of...

    Keith is right, I purchased a 4x8x1/4 sheet of mirror acrylic very expensive material but very good quality and it cut very good
  7. Traced out a shop stool from a full sized diagram

    Digitized the diagram and cut this stool on the CNC
    interesting part is the fact the stool has no glue or
    screws it just fits like dovetail jointery and will not come
    apart. its built from 3/4...
  8. Replies
    0
    Views
    146

    sign graphics digitized

    a file created to cut the vinyl on a vinyl cutter
    and apply it to a tempered glass panel

    https://youtu.be/xy6_Zl6E75M vinyl cut




    explanation:people asked about the spelling
    Caffe may...
  9. Digitizing a mirror decor diagram and cutting the parts

    using a full sized diagram I traced all the parts on a mirror arched frame and created *.dxf files

    and created toolpaths to cut on a cnc including the mirror panels
    This shows digitizing the...
  10. Replies
    0
    Views
    333

    shaper knives 1.25 shaft size

    I have sold my poitras model 3000 shaper and now the task of trying to sell all
    the carbide knives.all my carbide knives are USA carbide and in perfect shape
    from a one man shop.I have about...
  11. Replies
    0
    Views
    262

    100 watt laser tube replacement

    I have a new 10000hr RECI 100watt replacement tube rated at 118.9w
    bought as I thought my laser 100watt was failing, turned out it
    was the power supply and now i have no use for it, I paid...
  12. in my case I invested in the drawing board 2008...

    in my case I invested in the drawing board 2008 and have been drawing ever since
  13. All this would work but about if the template is...

    All this would work but about if the template is 10 foot by 48 in
  14. logic trace 2018 selecting the command lines and arcs

    I traced out a diagram using lines and arcs and showed where I selected line and where i selected arc
    I even put the cut part back on the diagram that I traced for a fit test...
  15. Replies
    0
    Views
    286

    drawing out vehicle door graphics

    traced out a jeep door graphic using logic trace 2018 and cutting it in grey vinyl
    on a vinyl cutter

    https://youtu.be/mP86dTHMb6I
  16. tracing a graphic design for a vinyl cut beach sign

    using logic trace 2018 for tracing and also using lines and arcs selection along with
    tracing using polylines I will digitize this diagram and create a toolpath
    for cutting on a vinyl cutter
    ...
  17. Replies
    1
    Views
    488

    dusk boat

    it was sold as is and completed

    and tested https://youtu.be/ek7IambS4RQ
  18. Replies
    8
    Views
    558

    thanks a lot

    thanks a lot
  19. Replies
    8
    Views
    558

    thanks and what pressure are you setting it at

    thanks and what pressure are you setting it at
  20. Replies
    8
    Views
    558

    replacement compressor

    Thanks... found this one on amazon and it looks ok and the price is ok.
    A china replacement is way more and I would think all I need is 50 psi, and the current draw here
    is low so it could start...
  21. Replies
    8
    Views
    558

    I have the smaller version of the Chinese...

    I have the smaller version of the Chinese compressor, found out after I ordered there were 2 compressors and the larger one was for mostly cutting,
    Its setup strange, they reduce the hose 3 times...
  22. Replies
    8
    Views
    558

    Info needed on compressor change

    I have a bodor 150 watt laser and the wrong compressor, to get the right compressor its a nightmare coming from china

    Would it be recommended to use the one I have attached photos.

    My first...
  23. USA carbide knives for 1.25 shaft shaper

    I have sold my poitras model 3000 shaper and now the task of trying to sell all
    the carbide knives.all my carbide knives are USA carbide and in perfect shape
    from a one man shop.I have about...
  24. New laser replacement tube 100watt --rated at 118.5 watt

    I have a new 10000hr RECI 100watt replacement tube rated at 118.9w
    bought as I thought my laser 100watt was failing, turned out it
    was the power supply and now i have no use for it,
    That laser...
  25. I wish i would have had this years ago

    I wish i would have had this years ago
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4