Search:

Very nice work. I like the proportions. I would have to add an addition to the house to hold an entertainment center that large.

My understanding is that AFCI breakers react to motors with brushes. Most motors on table saws don't have brushes. The other option is to determine if AFCI breakers are required on the circuits in...

As P T Barnum said, “There's a sucker born every minute!

Eastern Hemlock is pretty weather resistant. I've used it for pole barn siding.
484206

The siding is now over 20 years old and still going.

Are sled heists a thing where you live?

I have a Kreg miter gauge and I use it most of the time. However, when I have a piece that is wider than the distance from the blade to the edge of the saw table, my crosscut sled gets used. I also...

Yes, this is what I would do! There is a space between the bearing and the cutting edge on all bearing type router bits. If the bearing doesn't have enough surface to guide on you get a poor...

We live near Erie, PA about 80-90 miles from Cleveland. Our weather radar through apps comes from Cleveland. It often shows rain when our sky is just cloudy. We've had clear skies when the radar...

Before I aligned my bandsaw, I seldom used it. Then, I aligned the table and miter slot to the blade. Now I can change blades any time I want and as long as I center the blade on the upper wheel by...

We discard the rusty rings and never reuse the lids. For the cost of new ones versus the labor to put up the contents, we don't feel it is worth the risk to reuse rusty rings. It helps if you...

After some additional thought and looking at the images supplied by Michael Hanley ( http://imgur.com/a/aymktx2), it would appear that the shoulder next to the flange nut is a bit wide. From where I...

I would take/send copies of the bank statements and the canceled checks to the tax office, perhaps through your local state representative's office. You may need to ask your bank for certified...

This dresser is made of Yellow (Tulip) poplar.
483916483917
The first coat of paint felt like 150 grit sandpaper, but a light 220 grit sanding took care of that along with two more coats of paint. ...

I've encountered a number of dogs when running and cycling. When running, I stop and raise my arms, then yell as loud as I can. This will usually deter the dog and alert the owner. If the dog...

That's what I do.

My grandfather who was a carpenter taught me that trick. It is a lot faster than doing the math.

Looks functional.

Welcome to the creek, we look forward to seeing your projects. Fancy tools are nice, but the craftsman is the tool that make the project.

Our switch to a belt sander which will only sand in line with the grain.

I agree with the others. It isn't likely to split a piece of a log that has any size to it. The Diameter is only 1-1/4" and you would need at least two sets of hands. One set to hold the drill and...

My Neighbor made an ice tray that they filled with bags of ice when they had family picnics. They would nest all of the cold dishes in the ice and it would keep them cold all day. The tray was made...

The newer signs are much more visible at night, they fade with age. Us older folks like them that way.:D

I definitely got my wires crossed somewhere.:eek:

You need to be a contributor to see photos posted on SMC. It costs a minimum of $6 per year. Cheaper than a cup of latte at Starbucks.

Bob, I just noted that this entire thread other than the...

Your arbor has an acme thread, but your nut appears to be a standard thread. Is the arbor nut the one that came from the factory? Did you purchase this saw new or used? Looking at your arbor, you...