I have not had that same issue, but on my home(gaming) computer I've had some odd things happen in the past week or so. Won't come out of screen saver unless I hit alt+tab, screen stuttering while...
Type: Posts; User: Dave Gates; Keyword(s):
I have not had that same issue, but on my home(gaming) computer I've had some odd things happen in the past week or so. Won't come out of screen saver unless I hit alt+tab, screen stuttering while...
Have you tried contacting N&R marble?
Last year I had a customer that wanted an odd sized marble plaque in a specific color. We had a local counter top business make one for us and that worked out...
We had a job a few years ago to engrave 100+ watches. Each watch retailed around $5,000 :eek:. We mark serial numbers on custom machined robotics parts often. The pieces will sometimes cost close to...
Nice work!
Check out DIN Condensed.
I'd guess around 20- 25 minutes
I use a flap wheel on my dremel tool. I think it's 120 grit. I just use a light pressure and finish it off with high grit sandpaper or steel wool to match up the grain. Usually takes ~10 - 20 minutes...
I typed "Engineer" wrong on an etching order for these huge sport mugs(like 40 oz). I was about 80 pieces into the few hundred when we noticed the mistake. all the glasses were already masked and...
I think your looking for John Moses - johnmoses210@gmail.com
We've used his services a lot. He does a great job for very good prices.
Ross, we have a few customers that are insistent on having acrylic perpetual plaques(~200 plates) too.
What worked for me was to just laser out holes in a piece of scrap until I found setup that...
We had a similar issue in December. For us, it was a driver issue. Our laser would randomly slice/offset whatever I was engraving.
After talking with ULS, I installed an older driver(like 3 or 4...
Randy, we had to replace the laser tube exhaust fan a couple years ago on our VLS system. It was still working just not very well which caused similar issues to what you described....start job but...
Here's a video from JDS showing the application from the spray can on a flask. https://youtu.be/PVscWOHZ1bQ
We do a bunch of the Yeti style cups and its just a light coating that works for us. If...
The last large order of Yeti cups we marked, I had some cups that had cermark on them for about 10 days with no issues. So these items may hold up ok for longer periods.
I marked a customer's...
I agree with Scott. Accucutter makes a great cutter.
We have the same issue sometimes. Usually if you hit engrave, but don't send the job to the engraver, the lines will appear in the preview and afterwards if you cancel out. Sometimes messing with...
Check out the Object Manager docker....sometimes Corel likes to disable printing on a page or layer randomly. At least on my computer it does.
We use this stuff called PC-7 epoxy. It's been working great for us although it does not work on some plastics. It is resistant to chemicals according to the manufacturer's website also.
We have...
Josh, I did a double sided engraving job where the front and back were not symmetrical. For the sheet of wood I used, half the setup was Side 1 and the other half was Side 2. After engraving and...
I've been told Blender works OK. But like Lee said, it may not be Corel friendly
Glass Graphics, Crystal-D, or Crystal Blanc might have something
I had a problem with the 9V battery last year. We replaced it and the error kept showing up too. After a while we found that one of the wires coming out of the battery holder was not fully connected...
You can always go to the source http://www.rsowens.com/
I had a similar problem where the file I was trying to engrave/cut was a different size. Somehow I had changed an option in Print Preview to "Fit to Page" instead of the "As in Document" option.
Try unplugging and plugging back in the cables from the laser. Sometimes that works for me. A few months ago our laser would not fire and resetting the computer and unplugging cables did not work. On...