OK, I sort of understand what you are saying but let me clarify with my understanding of what is going on here.
When you power up the laser it appears to run a homing routine where the x and y...
Type: Posts; User: Rick Mellen; Keyword(s):
OK, I sort of understand what you are saying but let me clarify with my understanding of what is going on here.
When you power up the laser it appears to run a homing routine where the x and y...
Woohoo
I installed version .26 and the rotary axis settings are now in the User settings tab. I set the radius to 90, speed to 5mm/sec, and my 282mm line took 56 seconds to complete. Looking...
Again, yes. I set my diameter at 90 for my test.
I think we may have determined that my version of RDworks shows the rotary settings on the output tab which was buggy. Apparently newer versions...
Yeah, sorry, I meant speed. I'm used to my CNC where it's called feed rate. And yes I'm changing the speed value.
I actually downloaded version .38 and didn't see the Output tab with the rotary...
Wow, lots of questions.
1. Yes, I put a value of 90 into the Diameter and drew a line 282.74mm long for the test. It rotates exactly 360 degrees
2. Yes, I set the feed rate in the layer...
Yes, I know the USB reader is just reading what RDworks wrote to it. I have tried multiple versions of RDworks and the only version I found that seems to write the file in the, "correct" format is...
Are you talking about the user settings under the User tab? I've looked at those values but nothing looks like it would do anything except the Speed factor percentage under Cut parameters.
If I...
I recently purchased a 100w Chinese laser off eBay. It's one of the red and black models made by Shangdong Kehui Laser Equipment Co. LTD. I also purchased a 3 jaw chuck type rotary axis. For the...