Solution was found in LaserCut's Machine Settings. Thanks for pointing me in the right direction!
File --> Machine-Options --> Work Mode --> Cut --> Curve Disperse (was set to .02. I ended up at...
Type: Posts; User: Chris Neal; Keyword(s):
Solution was found in LaserCut's Machine Settings. Thanks for pointing me in the right direction!
File --> Machine-Options --> Work Mode --> Cut --> Curve Disperse (was set to .02. I ended up at...
Tony,
I tried importing that file, setting the speed to 200 mm/s and ran a test. It looked to be travelling at 10-15. Then I added a box next to the original design. My curved design gets cut...
I've seen similar results on some arcs in my projects: To me it looks like steps are getting skipped because the controller brain can't keep up with processing the planned movements while executing...
Thanks for the quick reply. I will try that out!
Just wondering if anyone can point me in the right direction for speeding up the vector cut movements on my machine. If I import a DXF into LaserCut 5.3 and start cutting, simple boxes cut at the...
Almost 2 years ago I ordered a G.Weike LG6040 with an 80W RECI laser tube. I had decided on an 80W after reading many pages on this forum, then coming to the conclusion that an 80W could provide a...
Here's why I was one of those people: Like Mr Sheldrake mentioned, the GF guys are very good at advertising. While I was watching their ad the first time, seeing all the things they claimed their...
Glowforge was good to me about 3 months ago. When I finally decided I was tired of waiting, they issued a full refund with no hesitation. A G.Weike LG6040 is all set up in my shop now =]
Hmmm... maybe there's a setting like that in Lasercut. Over the last few days I've been unboxing and setting up my G.Weike LG6040. A few times I've gotten stuck while trying to figure out some...
Bert,
I spoke with a woman at Rabbit Laser, so it wasn't Ray. Boss lasers seem pretty good.
Auto Tech I haven't seen much about. I only find a site that says Call Us for more info.
Ok. They're another American distributor instead of manufacturer I guess. While browsing through G.Weike's site tonight I noticed one machine that has the same frame as Voccell: The Storm 600
OK, thanks Bert, Dave, and Rich!
I probably won't need it. It's good to know there are specific G-codes for this purpose though: Cutter Compensation.
Also yesterday at the show I saw a...
I should have mentioned: One of the reasons I'm asking now is because I'm looking to upsize to a 6040 or 5070 Chinese laser (G.Weike, Shenhui, or Rayfine maybe). They either come with Auto Laser...
Greeting everyone. I'm new to laser machines and have been reading a lot in this forum over the past week, but I didn't find the answer to one particular question, and I was hoping to get some...