Search:

You should read them a little closer, especially #1. https://sawmillcreek.org/showthread.php?298511-Initial-Complimentary-Tools-for-my-NEW-lathe&p=3200862#post3200862

I'm not a fan of laminating 2 wider boards together to make a thick beam. All are other laminations are usually a balanced glue of odd numbers of layers. I would laminate the boards in a edge grain...

Wenge and other expensive wood boxes for $5 chisels? Seems counterintuitive. Make another box out of poplar and let the box match the chisels.

I'd share a picture of my shop and how I work, but I would loose any respect I have left. If I had any to start! I'm going to be 70 in a couple months, and have been nursing a bum knee for almost a...

Maybe I didn't make the best choice, time will tell. I'm not worried about maneuverability in the shop. When I had a full time shop, we used a skate type device with 4 wheels. When the plywood was...

I store my 800 and 1200 in a rubbermaid container. I put the lid on my bench and the stone on it when I use it. It doesn't slide, but I don't push down really hard either.

How does a Crazy Horse Dolley help me wheel in plywood from my van? Looks like it doesn't fold up too small when not being used either.

I'm at the end of slinging full sheets of plywood around my cramped shop. So this Bora tool seemed like the perfect solution. Found a great sale price and placed the order at an unknown place for me....

Explaining to new woodturners that standing by a spinning block of wood is extremely dangerous is far from sensationalizing. It's a concern for their lives. I choose not to mention the incidents...

I think you will find that buying a chisel set will provide you a couple of chisels that will go into a drawer and never come out. The face shield you are looking at is very good, but will not...

Not sure that's a good idea. It's not like bondo and using it to fill tear out could easily be a problem over the years. It's only made to fill tiny wood pores. Having tear out in the first place is...

Infinity Cutting Tools make German hobels. (planes)

I set mine so it lifts the wood and moves it 1/8" forward. This gives me the sprung joint I prefer, but still makes a very flat face on the stock.

A card scraper is my tool of choice.

Do you have one, or which one did you recommend? The OP asked for a 30A and that one is rated at 30A.

I sure wouldn't want to pay their regular prices, but those sale prices look great. Free shipping from an Iowa family business, sure looks good.

Pretty easy search....

Now you know why old wood shops had apprentices. The masters did not prepare the boards, the apprentices (indentured slaves, LOL) did the heavy work.

Proabably burnt the contacts in the remote relay. Since you don't mention model number or hp of the compressor, nor amp rating of the relay, we can only guess.

That looks like it has a manual feed crank? That's very unusual. I can't see any ball bearings in that breakdown picture, maybe all sleeve bearings? Machines that age usually had a slower cutter head...

No thermal reset buttons on the motor?

Checking against the face that hasn't been machined is a mistake. You may have some twist in the board and you are trying to make it flat, not parallel to the untouched face. The out feed table has...

They would just about be the only company in America making that implication. Trucking from the warehouse to your house is absolutely not getting cheaper. When did Grizzly order that machinery? It's...

Any kind of film finish will require a lot of maintenance, probably every other year of sanding and recoating. Some kind of oil would be better, but I have no direct experience with that. How about...

Do you think this controller would work for him? https://www.ebay.com/itm/120-VAC-To-DC-Motor-Speed-Controller-For-95-135-VDC-PM-DC-Motors-Up-To-3-HP-/303159304376