Another item for thought. The AHJ may not approve the reclaimed beams as valid support members unless they have a grade stamp.
Type: Posts; User: Billy Merrill; Keyword(s):
Another item for thought. The AHJ may not approve the reclaimed beams as valid support members unless they have a grade stamp.
In may part of the USA.
Post #1, that is a chopping block used to chop or slice cooked meats like whole hog. Have one. Search Ed's Shape Shack on Facebook for some of the finest ones made.
Post #8,...
Purchased the Pegas in November 2019 from Denny. After comparing it to the Seyco, the turning point was the Pegas was not required to me mounted on a stand. Where the stand was a part of the Seyco. ...
Most have been information from an air conditioner salesman.
Over the top wood shop, short version https://www.youtube.com/watch?v=7Y2rpgJRRtk
You'll want to watch the long version after seeing the short version.
I have the G700 not the G800. No issues in short cycling in a one man hobby shop.
Sure we get hung up on numbers, but the G700 will handle the orbital sander just as well as the SSPCS3 table saw or...
To replace the base, part only is $213. Labor, shipping, tax, ... not included.
If you plan on using the extension tables, then the base has to be replaced as they mount to the lower cap screw. ...
Try this link for connection on a duct work system, piping, airflow test.
https://www.youtube.com/watch?v=9MNXE_VFsIU
Emptying the dust bins and cleaning. ...
Have the G700 for about 6 months now.
Its a beast of a machine. Does a nice job with my power tools; SawStop 3hp Cabinet saw with router, 14" Rikon Band saw, Dewalt Planer, track saw, ROS sanders....
Spirit in Kinston, NC
As others have posted, the NEC does not regulate the number of machines plugged into a 220/240/250VAC circuit.
In a one man shop where you are the only one using a 220 volt machine, one circuit...
I've got the same B&D as mentioned above. Had it for 8+ years with no complaints. Used mostly to attach wire spades to electronic terminals.
Titanium coated drill and step drill bits. Hard to beat for the $
Impact driver tips (seems to be as good as the name brands for 1/2 the cost)
Torque wrenches. My son worked at an airplane assembly...
It is always best to run a supply of 240V instead of 120V if it is a dual voltage motor. With 240V, you will have a little more torque, and it will come up to speed a bit faster, but the biggest...
The blower on the DW 735 is simply over powering the blower on your dust collection system. Without upgrading you may want to just use a 55 gallon trash can with this connected. WORX WA4054.2 LeafPro...
Make sure you leave a list of what you actually paid for the tools, not what you said you did.
What are your results from the 5 side cut test?
12' first floor ceiling height.
40'x60' mezzanine designed for tool load. 9' ceiling height. Stairs and space of a lift.
You can get the workbench top model of the Nova if that would work for you at a considerable savings.
Bandsaw.
Have resawn 8'x16'x1" boards on my well tuned 10-326 and a double stack of feather boards. Used roller stands for infeed and outfeed support.
Works better with a helper, but it can be...
Back in stock at infinity tools.
If you do not have 240VAC across a double pole breaker then the breaker is not on a buss location in the panel to supply 240. Check the label inside the panel or on the door for which spaces will...
https://jayscustomcreations.com/2014/06/table-saw-infeed-support-arms/
Its time to get the subpanel installed.
Your dryer and your tools are wired differently.
The dryer receptacle has 3 wires, 2-120vac hots and a neutral, but no ground.
A dryer uses both...