Search:

Thanks, Aaron. Yes, Jim, but it is far superior to the flex I had and I have only one piece which I am moving from machine to machine. As tight as the space is I believe that will continue to be the...

Given the market is tightening everywhere, we definitely timed our move at the wrong time so we are not coming out of the sale/buy on our new place. That is the market and that’s the way it is. I’ve...

I just fired up the G700 yesterday. At this point I am using the 6x4x4 wye supplied with the unit and Rocklers blue plastic flex pipe. I understand that performance/static pressure will vary by...

We are up at the old, unsold property cleaning up the old shop. I will take a photo of my cracks and post when we return home. Much obliged for all your suggestions. Myles, you have given me one of...

I don’t think these seams can handle a backer rod. They are broad and fairly shallow. I think on the side with shelving I will try a tube of Sika and see how far it goes. I think it could easily...

The day this thread popped up I was going to order Oofos but my wife found a local store carrying them. I picked up the Clog model and have been very happy with them. I’m generally a size 9-9.5. In...

I’ve been having difficulty figuring the best lay-out for the smaller space. Sketch-up and other tools are available, but being simple I need simple tools. I think this has some possibilities.

Well, John, I won’t buy a grapple on your recommendation but upon looking at the oofos site I have ordered the Oofos Clog. I like Clog styles at about all times and am very comfortable with them in...

Now, John, at this point you should know that no one likes a show-off, but that is a pretty sweet set-up.

On our foothill property we mow from mid-March until about the first week of June. then the lawn dies back until the Nov/Dec rains. I mow really just to keep the foxtails down as our sweet dog just...

“Coiled horizontally?” I know what it means, but if confused by the term lay it off left/right, L/R in a serpentine fashion. Do not coil it in a circular way as it can trap oil in the lines and the...

“Microscopically.” I am constantly amazed at the intellectual level(s) freely offered here. I am a Neanderthal in the truest sense of that word, without the finer skills that section of the site...

Roger makes what to me is the deciding point. The Multics typically do not operate down to the low temps available on the singles. Check the specs on that as my info may be somewhat dated but a few...

I have two wall mounted units and yes the adjacent room definitely gets a bit of a hum. Not terrible, but at times you will pick it up. There are stands available so you can ground mount them. I have...

Greg, I’ve had the SSRT for some time now and have liked it a great deal. Mine is mounted to the Rt. I have found that I do not need the SS legs on mine. It has stayed lined up with no problems. I do...

I typically do not oversized mini-splits. In my experience they tend to exceed expectations. BUT, it all rolls back to the application. Size if building, insulation, building orientation, etc. It is...

My new place has expansion joints that were finished with a 1/2 radius trowel. That is a substantial opening and gets int he way of moving equipment. I was just out laying out the lighting and...

The duals and Tri‘s have always been more expensive. Initially in my last home I intended to buy a triple. Comparing the cost I ended up with a dual and a much higher seer single for less than the...

I am certain that you are correct, Jim. I think that no matter how supposedly well you prepare for downsizing you still end up with the 5 lbs in a 4lb bag. Our house with the lovely view, which has...

You might try your local RE Michel. They can probably access the pipe at least.

Well, we have been in for a week today. It has rained about every day. I got all my gear out of boxes and on shelves, but for the most part I’ve been helping set up the house. Amazing how many...

Michael, I do not know the square footage on your shop space, but in selecting the ducted unit be very careful in which one you use. I have been out of the business for 10 yrs now so this info is...

I bought a 7kw Generac a few years ago. It runs the place other than the shop which was built after the re-model of the home. It handles everything in the house including the well pump. It is the...

Phillips was a big step up from slotted. Robbies are good, but I’ve pretty much settled into torx. I like the GRK screws. I am baffled by those using only T25’s. I like the Cabinet Screws from GRK...

Quite a couple days. The house/shop were loaded yesterday. We were on the road at 4:30am to beat the trucks. Unloaded by 1:30 pm. They were a good crew and it was a positive move. Our daughter, SIL...