Search:

Hi Tom,
It’s a brand new saw. I have only tried a 1 inch resaw king and 1/2 inch Laguna blade that I fit new with the saw. It runs on two belts on a double wheel. One thing I noticed is that the two...

I tried testing for an out of balance wheel and it landed in a different place every time. Not sure where to do from here. I can see that the rubber wheel on top has a few small 1/32 gaps in which...

Thanks, I’ll give that a try tomorrow.

Hello all, we just wired our Laguna lt24 and we are getting vibrations while the blade is on but not with the blade off. I have tried sanding down the rubber on the top wheel as well as 3 different...

We have a 19/38 and a 25/50 and I have found both to be excellent machines. I love that the tables fold down on the 25/50 when not in use. I got by with these sanders when we were without a planer...

I just received a 24/17 bandsaw and a Supermax 25/50 from them and the communication and sales help before the sale has been excellent.The salesman was patient and knew every detail of the machine (...

Hi Joe, wow, thanks for the great info! I will look at the inverter on Monday. It’s funny because the lathe is advertised as 220 v on all sites but the motor says 230v . If 208 works they would be...

Would a buck boost transformer take care of the issue? I found a 208 3 phase to 230 single rated to 20.8 for 200.00

Hello all. Just received 3520c and will beusing in a building with 208 3 phase power. Mine came with a cord but it wasn’t connected. It states in the manual that you must hardware the lathe. Is this...

Hi Lukas , I have two boss lasers and I get my lenses from lightobject. They are priced nicely and last a long time. I keep a 4 inch lens on my 100 watt machine and a 2.5 on the 60 watt. If they get...

I have two Boss Lasers, a 20x16 60 watt and a 24x36 -100 watt machine . They have been amazing machines so far. The 100 watt will cut 1 1/4 thick pine with a 4” lens, not that I do this all the time...

Hello all, thanks for the help on this. I placed an order for a 3520c with swingaway tailstock, bowl rest, lift, rock, and roll base and a holdfast vacuum system. Also ordered a Vicmsrc 120 chuck and...

Just saw that I said planer instead of jointer for the Grizzly G0609x

Good point regarding supply chain issues. I have finally placed orders for the following items and the bandsaw and planer have a 4 month wait which actually works out since we won’t have new...

I just looked into these and they look amazing! I emailed the seller as I can't see if it just plugs in or needs to be wired. Looks like it would be fine as long as the gear shaft meshes up.

Thanks, I will look into this. In the meantime, I've been sidetracked by looking at the SCM S520 industrial 20 inch planer with Tersa head. I wasn't originally looking at that planer but the price is...

Hi Bill, do you have anymore info on the Servo unit.? I am definitely interested in knowing more .

Lots of good points. I’m really tempted to get the 24 inch machine because of the extra 4 inches and the lower price but not sure how much I’ll actually use the entire 24 inches.

Hi Bill, good point. I just checked and they source them from Tigra, a German company specializing in carbide and other machinery related business. Looks like they are 2.53 each

Hello all.
I have narrowed down my search for planers between a 24 inch Cantek for $7300, this machine has German made 4 sided carbide inserts.
The next machine is a Cantek 20 inch with 30mmx12...

Hi Van,
You’re correct, the Cantek doesn’t oscillate. That may take it out of the running. I was looking at Vega but the extra certification costs put it over my budget. The G0564 from Grizzly has...

I’m wondering if anyone can offer some insight on the Cantek ct-108 edge sander? I’m placing an order for a Cantek 20 inch planer and 12 inch jointer and saw that they also carry this edge sander . I...

Thanks Mike, they seem like a great deal . Do you know if anyone with experience with the Cantek 12 inch jointer? I’m thinking it would be of the same quality but not sure . That and the grizzly are...

Hi all ,
After all of the input, I think I’ve narrowed it down on the jointer and planer choices.
Here is what I’ve been looking at.
If anyone has input regarding the following 4 planers that...

Hi Patrick, I’ve been following this thread as I’ve been leaning towards ordering an AD-941 for a university wood shop. After seeing your comment, I’m wondering if I shouldn’t go with something more...