Thanks Brian. Should I return the CM bearing and get a C3 instead?
Craig
Type: Posts; User: Craig Meaney; Keyword(s):
Thanks Brian. Should I return the CM bearing and get a C3 instead?
Craig
Oh crap. I mistyped what I bought. Sorry!
They're the correct sizes for a DJ20. The pulley side bearing of the cutterhead is larger that the other side.
Hey Eric, I just moved a Dj-20. I used an enclosed trailer, removed the dolly and tied it town with four straps- two wrapped around the table at each end, two around the cabinet in either direction....
Hi everyone - I decided to replace the bearings in my DJ-20 jointer since I am putting in a Shelix and have it apart anyway. I purchased two bearings: Nachi 6005 2NSE9CM and Nachi 6005 2NSE9C3 for...
Welp I thought I'd circle back to provide an update in case anyone else is searching for this information. Thank you for all of the suggestions. I decided to rent an enclosed trailer because it was...
Thanks for the reply Eric. Did you strap it down from the tables? Did you add any blocking? My uncle is coming with me and he has some back/neck issues, so trying to limit the heavy lifting as much...
Thanks Maurice! Very funny. Not a done deal yet I still need to inspect the unit. I am considering taking the tables off, though I don’t want to throw anything out of alignment if I can avoid it....
I don't often move heavy machinery, so I'm looking for thoughts on this plan for transporting a Delta DJ-20 (~400#) into my walkout basement on Saturday. I watched Jonathan Katz-Moses video on moving...
Thanks Greg! I will follow these instructions to a T.
Thanks guys, delta mobile base it is. Any suggestions for what to check when I inspect the jointer next weekend before paying for it? IÂ’m purchasing it from the original owner who says heÂ’s used it...
I am picking up a Delta DJ20 and will need a mobile base for the shop. My floors are flat. Any recommendations?
Craig
Thought I would update this thread as I have since acquired a bandsaw. I wound up finding a local 16" Walker Turner 1100 series saw for a little over $300. I jumped on it. It needs some tuning up,...
I watched a YouTube review of that saw and it looks great, hope you’re enjoying it. I’d be leaning in that direction if I owned a table or track saw probably
Thanks. Sounds like it would just fit in the room with the 81” ceiling. I could probably go without the mobile base… or maybe I should consider a smaller saw. I didn’t even consider the tensioning...
Nice feature for sure. We have a kid on the way, so being able to take the key to disable the saw also appeals to me.
Good deal. Is Shop Fox the same quality as Grizzly?
I agree, the larger wheels have me ruling out the Harvey. Now I’m between the 514 with the brake, Laguna 18BX, or the shop fox on sale. My shop is in a basement with 80” ceiling height in one room...
Yes, certainly a good problem. I hadn't considered the 19" saw... now you've got me looking at it. An additional 2" throat width and 1 HP might be worth the trade off of not having a break.
The...
I had pretty much decided I would buy the 17" Grizzly G0512x2bf bandsaw when I started taking a close look at Harvey's HW615P. Their 15" bandsaw seems well built. Here are the key differences, would...
Wow quite a few recommendations for Ridgid as a general purpose vac! I'll be picking one up and checking out Festool if I ever decide to get a dust extractor. Thanks for all the replies!
Bring on the recommendations! I'll be using it for general around the house use (some drywall work coming up) as well as woodworking once the shop is up and running. I'm open to "extractors" and...
thanks I did that it worked well.
Hi all,
I am building a small drawer for my dutch tool chest. The drawer front has a slight bow, so I'm wondering if I can glue/clamp the front of the drawer bottom in the groove on the back of...
I'll keep an eye on it for sure, thank you for the heads up.