THanks Jim, for the quick reply.
I will have to give this some more thought.
Lane,
Type: Posts; User: Lane Hardy; Keyword(s):
THanks Jim, for the quick reply.
I will have to give this some more thought.
Lane,
Mike I know this old info however I wanted to know what were your results with spraying the Minwax oil Modified Polyurethane with the Earlex 5500 I have the same one, did you have to thin it? Lane,
Hi Matt, Good question, I looked at the big box stores for the flanges and they were around $7.00 each. Since I use 5 inch hose with my system that has The Supper Dust Deputy at 5 inches I wanted to...
John made that video back in 2013, I bet if you asked him what would he would do different it would probably be plenty.
i think that investing in a cyclone you will be ahead of the game in stead of...
I wanted the same thing a automated blast gate that is open when ever I turn on a piece of equipment,
I looked at the Ivac it was out of my grade so I built mine using a Arduino Micro Controller, I...
I had a need to move my 5 inch DC hose to various machines, so what I did was take water closet flanges (toilet flange)
and flattened the faces of flange smooth then drill 4 1/2 holes and glued...
I have been looking for a coupon as well I about to purchase a 17 inch Bandsaw and base and several blades.
I sure would love to find one also.
I signed up for the mails three weeks ago and the new...
I could not resist! Deliver it to my house I will get it off your truck! Seriously, I needed to move my table saw and rented a trailer form u haul, the trailer had a gate that folded down to the...
Thanks Bill, the metal cutting would typically be 1/4 plate steel 1 inch square tubing or smaller. I have found that my Bosch saber saw with a Bosch metal cutting blade works surprisingly well I have...
My suggestion is like many others here, I wore corrective lens for 37 years and I fly airplanes for living, I got to a point that I needed trifocals to have distant and visision at 12 inches over my...
Jeff, John, Jim, Van, thank you for your reply,s
after all of your input I am going to stick with dedicated wood and metal saws for the reasons Van and Jim and John Mentioned,
i would be doing...
I am a Hobby wood worker looking for a new Band saw in the 17 inch category,
i first considered the Grizzly GO640 verible speed Metal/wood Saw at $2155.00
I do want to do some metal work but not...
That is funny Bill, it nice to see that those here have varied hobbies N2ZAD.
Christopher,
The photo of the power cube is a little blurry, Does that power cube out put AC voltage or DC voltage?
I have the same unit and used a Direct Current power Supply. This maybe your...
Your Wife is a Keeper Does she have sister? :)
Thanks Jim for posting this, I have been looking for a lift for a while and I did not think of it being a mixer lift.
I have also been kicking around the idea of a pull down shelf from above.
can SawmillCreek update the file format that ca be up loaded?
Apple just went to this HEIC format and SMC does not recognize the format.
396067 396068
I needed a way to make a simple quick hose disconnect for various tools.
since I am using 5 inch pipe with my Supper Dust Deputy and then short 5 inch hose I took two toilet flanges...
The need for a permit varies with city’s or states and Counties,
I built a poll barn with a concrete floor and put in my wood shop the back half had a gravel floor for the farm equipment.
I built...
A mini Split was the way to go for me, I live in West Texas and it does get hot (104 is not un common) and very cold ( I have seen 0 degrees ) the humidity varies. I have a 400 sq ft two car garage...
I used 5 inch ducting the airflow is much greater than 4 inch.
You are making progress!
Update to 9 volt battery as a power supply, as I thought the 9 volt battery does work, but not very long, I had the battery attached to the my dust sensor and the battery lasted two weeks, longer...
Can you post pictures so that those in the know can better evaluate what you are trying to accomplish?
:)
This is the sensor on my home grown Cyclone with a Shop Vac.
The first photo is the top of the dust bucket with the senor pointing down mounted into 3/4 MDF.
There is a potentiometer on the top of...