Search:

Rebel ;) ...

Folks should stop saying Felder and Hammer in the same breath. They are night and day.

Agreed. Wouldn’t sand at all personally.

Definitely look at the Scorpion line from CWI. I would consider it superior and more fully equipped, including heli-head, than any of the machines mentioned so far.

You can’t cut curves on a big bandsaw?

You can get the Festool stuff anytime. Might not get a better bandsaw if it’s a good deal. Bandsaw all the way in my opinion.

I use a Dyson fan which I mount to the saw table which blows the sawdust away from the blade and gets directed straight into my homemade sawdust burner that I’ve got setup on my workbench in the...

Jim, I find straight line ripping a rough board on the slider sure saves a lot of passes at the jointer.

You want it, buy it. Simple.

Best thing to do with oak is let it continue its life as a tree.

They're in aisle 6, right next to the Aigner Deflector.

You’re just joking right?

nice looking chunk. Let's just call it Mahogany like everything else. ;)

Build a ramp. Take machine off pallet with a pump jack

Doesn't appear to be available anymore. You could try graphite ski wax or make your own .

$7k tops with everything included would be a good deal. If you're going to spend $12k, then you should be looking at a new one.

Good stuff. Glad it's working out.

My mistake. Just looked up the T55 and it's specs and features put it solidly in the 700 felder class. There is a 200kg weight difference between it and the 900 though, which is noteworthy.

these machines don't compare at all. You must have noticed the vast price difference? minimax = hammer /// scm = felder

A pretty cool solution to a problem that doesn't exist.

Hi, just looking at your shaper makes me nervous for you, but maybe i'm just a big sissy. But then when you ask "I don't have any problems hand feeding through the router table, will the shaper be...

As Matt has said. This service is called commissioning . It is the most important and worthwhile accessory you can buy for a precision machine. Your machine will be running perfectly after this...

Do you want to book match? Do you want to cut your own veneer? If so,yes. If not,no.

Before you do anything, read these articles. Lots of excellent info

http://surfprepsanding.com/2014/03/31/does-your-sanding-make-sense/
...

It doesn't tell you how to use the saw.