Search:

Type: Posts; User: Tom Dixon; Keyword(s):

Page 1 of 9 1 2 3 4

Search: Search took 0.01 seconds.

  1. If you go this route you likely will never need...

    If you go this route you likely will never need to upgrade unless you move to a much bigger shop with many more tools. I have it's 5HP bigger brother the G0442 and I'm extremely satisfied. I'm...
  2. Dave They are made by laminating two sheets of...

    Dave They are made by laminating two sheets of 3/4 baltic birch plywood together. Then I cut out 9" squares and used a 6" hole saw to cut out the middle. I set the lowest speed possible on my drill...
  3. I purchased the Grizzly G0840...

    I purchased the Grizzly G0840 about a year ago and I'm pleased with it's performance so far.
    433139
  4. +1 for smooth sleeves only As Jim said, They are...

    +1 for smooth sleeves only As Jim said, They are the way to go!

    All my pipe, fittings and hangers came from The Blastgate Co. I made my plan, from that made my list and then contacted them via...
  5. This was my solution. Cheap 2" castors and some...

    This was my solution. Cheap 2" castors and some scrap lumber. I bought the Eastwood metal cutting saw specifically to cut spiral pipe but is coming in handy for other projects now. I cut 8" and 6"...
  6. Steve I'll post what I think you are asking for....

    Steve I'll post what I think you are asking for. If you want me to zoom in on a machine connection or some other detail let me know and I'll gab another photo. As for hangers I used two types. For...
  7. Why not raise the cyclone up on a platform and...

    Why not raise the cyclone up on a platform and just run a longer flexible hose down to the collection bin on the floor so you can get a straight run out of the cyclone at the height you want to run...
  8. Replies
    23
    Views
    956

    Being the newer design and based on it's age it...

    Being the newer design and based on it's age it is probably worth $1,600. However you should probably offer $1,400 and see if the buyer will take it. When you look at it be sure to note every blemish...
  9. Replies
    39
    Views
    1,467

    Try getting a quote from The Blastgate Company....

    Try getting a quote from The Blastgate Company. Go to their square to round page. https://www.blastgateco.com/Spiral-Wyes-Tees-Square.php
    I had them make me a right angle square to round 6"...
  10. Replies
    23
    Views
    1,002

    One thing to consider, if you don't own any...

    One thing to consider, if you don't own any vintage machines you absolutely couldn't part with, is to just sell most or all of your heavy stationary tools. Chances are wherever you move you won't...
  11. Replies
    20
    Views
    1,033

    You can also find tons of models in the 3D...

    You can also find tons of models in the 3D warehouse. My 3D warehouse page has some more machines as well as spiral pipe and fittings and PVC pipe and fittings....
  12. Replies
    10
    Views
    380

    Both of the Bear Crawl mobile bases I have I cut...

    Both of the Bear Crawl mobile bases I have I cut down the tubes on a metal cutoff saw. One of them I cut all 4 tubes. I have my bases snugged right up to the machine bases. No additional clearance. I...
  13. Replies
    0
    Views
    162

    JessEm Pow-R-Tek Malfunction

    Well... supposedly the problems with the JessEm Pow-R-Tek router were supposed to be solved before I bought mine last year. I have used mine on a few projects but not extensively because I was...
  14. Replies
    7
    Views
    384

    Before I moved to TN in 2013 I bought QSWO from...

    Before I moved to TN in 2013 I bought QSWO from Brian. Beautiful stock. Lots of book match selections. He marked the cuts so he knew exactly where they came from the log.

    Too bad Youngblood...
  15. Replies
    25
    Views
    1,544

    My shop is done completely with spiral pipe and...

    My shop is done completely with spiral pipe and fittinggs from http://blastgateco.com
  16. Replies
    7
    Views
    468

    Workshop design is often a function of budget...

    Workshop design is often a function of budget constraint. It would be helpful if more detail on proposed square footage and general requirements. I wouldn't necessarily choose a ceiling height of 16...
  17. Replies
    22
    Views
    1,568

    https://media.giphy.com/media/d3MMG783p7VBlkEU/gip...

    https://media.giphy.com/media/d3MMG783p7VBlkEU/giphy.gif
  18. Replies
    28
    Views
    1,690

    You can't. This is a case where if you want it...

    You can't. This is a case where if you want it buy it. Don't try to justify it.

    I love my Nova Voyager. I sold my old drill press before moving and got 75% of what I paid for it. When it was time...
  19. Replies
    25
    Views
    1,329

    +1 for the window surrounded by cabinets. Awning...

    +1 for the window surrounded by cabinets. Awning outside the window for summer to keep the direct rays out. roll it up to get the rays during winter.
  20. Replies
    16
    Views
    701

    The OP has a PC690 so he appears to primarily be...

    The OP has a PC690 so he appears to primarily be interested in a lift for what he already has.

    In all actuality a lift is more flexible than the Triton plunge router in that a good one allows you...
  21. Replies
    16
    Views
    701

    The JessEm Rout-R-Lift II to fit a PC690...

    The JessEm Rout-R-Lift II to fit a PC690 is value priced at close to half the price of the Kreg lift. I used it's predecessor the Rout-R-Lift FX for close to 10 years before I upgraded to the Master...
  22. Replies
    52
    Views
    3,481

    I found that I was using my delta folding ...

    I found that I was using my delta folding outfeed table way too much for assembly which got in the way of using the table saw. So I recently constructed a full size table that runs the length of the...
  23. Replies
    23
    Views
    1,463

    +1 for block knee wall approach. That is how I...

    +1 for block knee wall approach. That is how I built my 24'x36' shop in TN. 2' 8" wall on poured foundation. Concrete for the floor was poured inside the block. Walls are 8' 2x6s. Here is my entire...
  24. Replies
    26
    Views
    1,449

    By all means yes. Just be sure to use millimeters...

    By all means yes. Just be sure to use millimeters and decimals. I've sworn of Imperialistic fractions. :p
  25. Replies
    26
    Views
    1,449

    A Multi Dustverse... Fascinating!

    A Multi Dustverse... Fascinating!
Results 1 to 25 of 225
Page 1 of 9 1 2 3 4