Search:

Type: Posts; User: andrew whicker; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Whew. Got it. It needed some sealant somewhere...

    Whew. Got it. It needed some sealant somewhere on the inside sticky side of the seal.

    Feels so good to get this solved. I have a job requiring more veneering and I was getting nervous.
    ...
  2. So I left the table closed and flooded with water...

    So I left the table closed and flooded with water last night, mainly out of tiredness.

    I turned on the pump this morning and it vacuumed to 24 in hg. I couldn't see any water spots from a bag...
  3. So I really pressed my thumb until the pump inlet...

    So I really pressed my thumb until the pump inlet and got 25. Then I really clogged the table patten hole and got 25.

    Then I got tired of screwing around and started dumping water on top of the...
  4. I'm heading back to the shop soon... I'll check...

    I'm heading back to the shop soon... I'll check some things and get back to this thread.

    Thanks for taking the time for responding. I'm tearing my hair out with this one.
  5. hmmm I thought that too (regarding the vacuum...

    hmmm

    I thought that too (regarding the vacuum pull when it's plugged at the pump).. I keep flipping back and forth between thinking it tells me something and that it doesn't tell me much. It is a...
  6. Kevin, What does your pump pull at the pump...

    Kevin,

    What does your pump pull at the pump inlet when you plug it?

    I'm not that impressed that at basically zero volume it can pull a vacuum. I really have tried looking everywhere for a...
  7. The description / marketing says it can run...

    The description / marketing says it can run continuously, but yeah. You're probably right.

    I pushed my luck.
  8. There was some hardened crap on the cylinder...

    There was some hardened crap on the cylinder walls. Nothing crazy. Cleaned with 0000 steel wool. Still no pressure.

    Going to look for new piston gaskets / rings and reed valves.

    Otherwise it...
  9. I blew up the bag with my air compressor...

    I blew up the bag with my air compressor (partially). My line has a one way valve in it so that was useful.

    I put some body weight on it and couldn't see or hear any deflation.. Considering how...
  10. From memory my system was normally at 12 ish in...

    From memory my system was normally at 12 ish in hg and that seemed really strong
  11. Trying to do this from my phone... Website isn't...

    Trying to do this from my phone... Website isn't great on phone and I guess I magically deleted my previous post..

    Anyway, 7 in hg is basically nothing. I get 5 in hg when I run the vacuum with...
  12. I found I can put a piece of chalk into the table...

    I found I can put a piece of chalk into the table hole and plug the line up to the table completely enough to get 20 in hg.

    Sorry, numbers above are for inches mercury... I'll update.
  13. Veneer supplies pump (140rnd db2) - manual

    Hi,

    My flip top table system was bought used and the previous owner had the above pump. I suddenly lost the ability to get vacuum in the system and I can't find a leak in the system. It would...
  14. Replies
    13
    Views
    802

    I don't like the look in this scenario. I like...

    I don't like the look in this scenario. I like the cones of light look.
  15. Replies
    13
    Views
    802

    cabinet lighting - brands

    Hi,

    I'm looking for under cabinet puck lights.

    I found a Canadian brand, Dals, which looks high quality (instructions, specs, catalog are all professional) vs the std Chinese knock off...
  16. Replies
    8
    Views
    698

    Cabinetmaking scribe

    Hi all,

    Wondering what your favorite cabinetmaking scribe is.. about to get one for an install.

    Cheers!
  17. Replies
    60
    Views
    4,426

    Yeah, whoops. Got my responses, etc mixed up. :)

    Yeah, whoops. Got my responses, etc mixed up. :)
  18. Replies
    60
    Views
    4,426

    Here's a Shaper for sale for the same price in...

    Here's a Shaper for sale for the same price in Utah:

    https://classifieds.ksl.com/listing/65500394

    :D
  19. Replies
    60
    Views
    4,426

    You got it LTL shipped across the country for...

    You got it LTL shipped across the country for $200? That's seems like a steal.
  20. Good responses! Thanks much. He bought the...

    Good responses! Thanks much.

    He bought the fridge. I have specs. Interesting to note the actual built in vs marketed built in. I told him it won't have a toe kick (this fridge has a flush...
  21. It's a proper fridge for built in. Concern was...

    It's a proper fridge for built in. Concern was the odd drawing / dimensions in the manual. It's no biggie if the door is flush with the overhang. I just wanted to think it thru and see if I was...
  22. Right. I'm thinking out loud to a degree, I...

    Right. I'm thinking out loud to a degree, I think I could add 3/4 nailers and have plenty of room for airflow at the back.
  23. Replies
    25
    Views
    1,308

    Here's a photo of my BB bought at MacBeath in...

    Here's a photo of my BB bought at MacBeath in SLC, UT. 4x8 sheets. The veneer doesn't look too thin to me. Again, I'm sure I have 5x5 scraps floating around here somewhere, but I wouldn't know...
  24. Building cabinets with a built in mini fridge

    Hi,

    I'm building a cabinet for a built in mini fridge. When doing this, the depth required for this fridge is 25.2" according to the website (New Air). This is quite deep, especially with an...
  25. Replies
    29
    Views
    1,834

    Not just the weight.. have you handled a 5x5? I...

    Not just the weight.. have you handled a 5x5? I am 5'9 (and mostly square, i.e. my ape index is 1) and I can't reach the top of the sheet, so it's a total pain to carry around. Let alone doubling...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4