Thanks guys. I'll definitely leave it as is. It is a 3 knife head and I'm familiar with the gib set up, the babbitt bearing is what I'm unfamiliar with. I know to keep the oil reservoir full but I'm...
Type: Posts; User: Jared Burkey; Keyword(s):
Thanks guys. I'll definitely leave it as is. It is a 3 knife head and I'm familiar with the gib set up, the babbitt bearing is what I'm unfamiliar with. I know to keep the oil reservoir full but I'm...
I'm purchasing a "the porter" model B 16" jointer for $1400. With the exception of a newer baldor motor this thing is original original. It's been well maintained and the babit bearings have been...
I found a manual online with pictures of the interior of the cabinet. Now I know that the entire drum brake assembly was unbolted and removed. Anyone know where I can find SAC parts? Sense they went...
Mine is Italian made as well. Mine has 2 pedals. 1 labeld lock and 1 brake. The lock functions and I have considered disconnecting it. I haven't ever kicked it while it was at full speed but I can...
About 2 years ago I bought my Powermatic/SAC TS.110 shaper. At the time of the purchase the spindle brake was already disconnected. I had plenty of refurbishing to do at the time of the purchase so...
All about what I had thought. I need a 10' rip capacity and altendorf has always stood out to me as being a class above. I know other companies make quality sliders but if I'm buying used I'm buying...
https://www.ebay.com/itm/184097847524
I'm in the market for a slider and have been seeing sponsored ads on Ebay for the AMW PS05 sliding table saw. I can't fi d anything on this company but they seem to be made domestically and cost...
Update. While replacing the feed wheels I noticed the third wheel had been struck by one of the pieces hard enough to tear the rubber419910.
After replacing the wheels I was going to start...
So I purchased some stock feed wheels from my local woodworking machinery supplier (whos opinion I also trust, his main business is onsite machinery repair) because I need to be assembling these...
I definitely had enough pressure. I'll be purchasing new wheels tomorrow. Are the polyurethane wheels worth the extra cost?
Haha. Yes I ment that I wiped down the feed wheels with laquer thinner. Not just to clean them but to soften them enough that they would hopefully have enough bite to keep pieces from ejecting. It's...
So I've got a small cabinet shop and I run a "powermatic" 7.5 hp ts 110 shaper (made by SAC) with a 1hp 3 wheel powermatic feed. I have a custom made 3 knife insert head that I run all my cope and...
Thanks guys! I've got one on order
I increased the pressure until it was so tight I could barely get the piece under the roller, it pulled back easily on both sides. With a feel test the feed belt is probably comparable to 180 or 220....
No, I bought it second hand so I have no tech support contact info. I had to download a pdf owners manual.
I Set my initial depth by putting a piece under the drum and raising the table until I can barely feel resistance and hear the paper while turning the drum. I start with 80 then I finish with 2 light...
I've had a my own cabinet shop and a performax 22-44 for about 6 months. Previously I worked in high end cabinet shops with 36"+, 2-3 head wbs. The transition has been...eye opening. After spending...
It was Bremas switch but never found anything from them even close to what I needed. I ended up 2 more switches off line and one of them was able to be configured properly. Thanks for the replys...
I'm setting up my cabinet shop and have been fine tuning my machines getting ready for production. The foward/reverse cam switch on my "Powermatic" (SAC) Ts.110 shaper was stuck in forward. I used...