Search:

Art:

Thank you..I forget about the different power sources making a difference.

my Tykma is a MOPA and some of my "good" passes dance around your settings.

I found best results in the 100...

Thanks guys.. I have been mulling this in my head and forgot you all aren't mind readers! ;)
It's a Tykma 20w Fiber
the settings that I liked (so far) were 2 passes, 200mm/s, 35% power, 125 frq...

Hi folks.

I searched, I promise, but in this case I got too much information but couldn't find the relevant info.

I am trying to put a dark black mark on some stainless. I don't know the...

Running EZCad and I'm trying to make a test pattern that I can use to test material.. but, I only seem to be able to use the first 8 pens/colors.

So, I draw my block and fill it. Default appears...

Thanks Kev..

Please correct me.. I ASSUMED that by rotating the fill, that would generate a crosshatch..

Also.. why are you suggesting a larger spacing (of .04) on the crosshatch. Honestly,...

Fiber laser
20w

material is stainless, maybe a 316.. not totally sure


I am engraving some police badges into some firearm slides and the badge has a few large areas of cut depth. The problem...

I tried it for grins. Best I got was to create a "shiny" area on the cut surface.

You could, in theory, cut through it though. On my fiber I set the settings fairly low, set to continual burn and...

Hey Folks..

I was fooling around experimenting today and I put a piece of glass on the bed covered the surface with perm marker and set it on an aluminum plate.

Default settings (200mms/100%...

I'm not saying they WILL, but you can try. SALE lasers in San Antonio is an engraving shop and sells a chineese fiber that they put their stickers on.

They offer a couple different training...

Hey Eric,
You and I are sitting in the same chair at the same moment. I've spent many hours reading the posts here and gotten a lot of really really good advice and learned that there is really some...

Hey all!

First: Thank you to all the contributors on the forum! Honestly. I only just joined, but I have been seeking, and finding advice and help in the forum for a month or so. And a little...