Hmm>
I usually print preview first before I print, using the Corel Draw app and the Epilog driver.
In the print preview, You can adjust the 0,0 position and there is a magnification factor.
...
Type: Posts; User: andrew zen; Keyword(s):
Hmm>
I usually print preview first before I print, using the Corel Draw app and the Epilog driver.
In the print preview, You can adjust the 0,0 position and there is a magnification factor.
...
Virtual Machines and Ethernet to LPT adapters. "Add a network printer" , or create LPT2 and link to TCP/IP port. Put a CorelDraw on one VM, clone. If need be, move the VM to different computer in...
You are going to spend 8 hours or so researching this and risking buying parts that don't work. Epilog knows the price to pain point and priced accordingly. They are also carrying inventory and...
To allow USB devices to be accessed by the Virtual Machine, you need to tell the host OS to ignore them as a USB is a point-to-point protocol, and pass them through to one of the virtual machines...
The OP was about getting CorelDraw to work. I use QuickBook 2011 with no issues, With it on a VM I can get to it anywhere as I have a pinhole through my Firewall and remote Desktop into it. This...
Het Scott,
Andy here. All these legacy things can be fixed using virtual machines. VMWare is the leader, and there are a few out there. For things like this, I use VirtualBox from Oracle. Its...
Transfer the number to a VOIP provider like flowroute.com and have them forward the number to the new number for $1.99 a month.
Or transfer to floroute and keep the number.
There are options...
I go to Kauai all the time. kinda work/trade I have going.
Thanks for buying in Hawaii.
Koa is mostly found on the Big Island. Barged over after it is kiln dried. Price of Koa went up as the...
Thanks, I am thinking $35 minimum, and then give away to a few that would value a free pen to them. I give a pen at a meeting and then when they leave it there I pick it back up and give to...
I finished over 100 pens last week. Pretty fun, learned a lot. I bought the cheap funline slim and comfort pens of different metal finishes from PSI.
I have 6 twist mechanism fail, 2 were...
Dang, what are all these laser people doing in the turners forum. I went to the IAP and I think a good way to go is kitless. Maybe one of the makers will sell boxes of components not kitted. Get...
some of those dayacom kits look familiar. prices of 100 can be more than penn state. they have the premiums also. waiting for price break quantities, prob > 200 to 1000 avgood start.
thanks, dayacom looks good. I have an order for 100 pens lasered. guy doesn't care about style or wood so the laserbitz pens are perfect. they look like dowels with center bore and an end taper....
How are you heating the acrylic? MAPP Gas? resistive wires? Think of acrylic as tempermental, too much heat too fast and it freaks out and turns to wax So it is good to slowly add heat to find the...
OMG, "The which exhaust fan should I use question". The breakdown is this. Loud vs, less loud. Cheap vs. less cheap. convenient vs less convenient. Everyone here will promote the one they are...
Is $160 a lot for an award? Will your customer pay $250+ for the trophy?
Thank you so much, my gf is all about dragonflies and these are great vectors.
I am a manufacturing guy. Be working in the computer chip industry for a long time.
I am turning pens (and other things) as I recover from the enterprise software career.
I have 4 shopsmiths...
I like how the guy had no hand protection as he was using MAPP gas. MAPP Gas burns at a million degrees or more, ten times hotter than the sun or so I hear.. The broad flame he was using is great...
I fixed a laser worse than this.
Everything rubber or plastic you have to assume is melted.
You will need new keypad, acrylic glass on top and probably belts, hoses, air assist shocks for the...
Can't you test for chlorine using the cooper wire flame test?
Heat copper wire with propane, mapp gas
Take to the rubber and melt it onto the wire.
Hit flame on the wire with the rubber.
...
The grease Epilog gave me two years ago was brownish white.
Here is what IKO says.
IKO Recommends replenishing the grease every 9-12 months.
Use Multi-temp PS No.2 grease or similar high...
Epilog provides a syringe of bearing grease for the IKO bearings in the Legend EX I have.
Works greats but comes in small quantities. I used some of that grease in other projects like printers...
I rebuilt a 24ex. If the belt is loose, things can be off, but usually a lot - 1/4". There is something on the head like an idler pulley to stretch out the belt a little, you should be able to push...
Unrelated to your post.
I make desktop water fountains. Laser used for so much of the components. Connecting to the pump: acrylic tube, rubber o-rings, vinyl tubing, laser acrylic couplers and...