That is just fantastic. Looks great. If I ever have the opportunity mine would be very similar. Well done.
Type: Posts; User: Bryan Cleveland; Keyword(s):
That is just fantastic. Looks great. If I ever have the opportunity mine would be very similar. Well done.
Jim. Thank you for starting this thread. I’m learning a lot. No future plans(tho I wish) to build my own shop from the ground up but still very interesting to learn all that one must go thru to erect...
Currently reconfiguring my design. Thanks Aaron for a different configuration idea. One thing I may not have mentioned is that I live in a typical HOA community. Cyclone MUST be installed in the...
Unfortunately installing the cyclone in the attic is not do-able. I contacted Clearvue awhile back asking that question and due to the fact that I live in North Texas and the summer temps in the...
I’m am very constrained on space for my cyclone in my garage. Main goal is to lower the noise level and my proposed noise closet will just eat up to much interior space. Thinking of routing it up...
Jim you are doing your own spray foam insulation? I’d like to hear more about that and the performance of the G700. I almost bought the G700 and sold my Clearvue but believe it or not backed out of...
I’ve had my Mitsubishi mini-split 6 years now and all I did was buy one of those blue 3m cut to size filters at Lowes. Cut a strip and it sits right on top of the inlet. Before the blue plastic mesh...
Definitely gonna use the shaft key Chris. But good tip tho about the soft start. Honestly I had no idea you guys were using these with vfd’s all these years. Make sense. Good to know I’m not in...
Excellent recommendation on the mention of the sound waves bouncing in that corner and reflecting like a horn. Never even thought about that. I plan to address that issue once I have the new motor...
So far I have found that the CEMT3613T has two other variants VEM3613T is footless (no base) and the CEM3663T which is a cast iron version. Haven’t found any cheaper online and I’m skeptical about...
Contacted Clearvue to ask a few motor questions about upgrading my single phase motor to 3 phase with a vfd to allow running slower to tame the noise.
They replied and mentioned that they have a...
I own the CV1800 with the Leeson single phase motor. I am planning to purchase the Baldor 3 ph motor Clearvue sells unless I find something else with the same specs but in 3 phase.
I have a very...
Here is what I have finally come up with. Skinny rectangular box is 5”x36”. 1/2” material. Interior 4” x 35”. Cutout on bottom is approx. 6” above floor. Exhaust air flows down to cutout, up into the...
Think I need some help here. What would be the ideal dimensions for return air flow to exit the closet? Minus insulation.
I have created around 20 different designs for return air that I...
Haven’t forgotten about this thread. Been super busy. Trying out some designs.
Jeff to be honest I have no idea what under the slab. During construction I saw a grid of trenches dug down several feet. 4-5 feet u guess. Inside the grid were large squares covered with tarps. Dirt...
Ok y’all I gotta run. John I’ll get back to you on that. I’m liking the sound of that. Forgot the dimensions. It’s constructed from 1/2” mfd. Interior dimensions are 7.5” x 68.75” x 7”. Up where the...
Yes I will definitely be building with screws. Crappy part is that the bottom plate will either have to be attached to the garage floor with either construction adhesive(not a lot, but enough) or...
Jamie. I never mentioned it but my plan is to either build a floor standing frame to support the cyclone or utilize cushioned suspension isolators from my ceiling joists directly above. The. Build...
Jim it was your design I took from. I will play around with my 3d model and try putting it on either side of door frame. Guess as long as I stay larger than the outlet on the blower housing I should...
Oh never thought of that. I was checking out the link you provided see what all they had. If I do line the baffle do you think it will restrict the air flow?
Oh yeah there’s quite a bit more going on inside the closet than pictured. I’m going to purchase a scratch and dent prehung door. Steel or fiberglass insulated. I’m going with a layer of 5/8” drywall...
I’ve been designing a closet for my CV1800 for a few months trying to find a way to make it fit in my little garage and I think I have finally cracked it. My only concern is with the return air...
Well that clears it up. Makes more sense now. Thanks very much.
I know this thread is old but just installed my magnahelic 2005 gauge on my cv1800 and only reads when connected to the LOW side with HIGH side left open on back. Both side ports are plugged. Can’t...